Gecko [ italicatiles.com ]

Name	Size	Permission
X11	[ DIR ]	drwxr-xr-x
[	66.89 KB	-rwxr-xr-x
aa-enabled	18.23 KB	-rwxr-xr-x
aa-exec	18.23 KB	-rwxr-xr-x
aa-features-abi	18.23 KB	-rwxr-xr-x
addpart	30.31 KB	-rwxr-xr-x
addr2line	23.14 KB	-rwxr-xr-x
apropos	51.29 KB	-rwxr-xr-x
apt	18.31 KB	-rwxr-xr-x
apt-cache	86.38 KB	-rwxr-xr-x
apt-cdrom	22.38 KB	-rwxr-xr-x
apt-config	26.31 KB	-rwxr-xr-x
apt-extracttemplates	22.39 KB	-rwxr-xr-x
apt-ftparchive	270.39 KB	-rwxr-xr-x
apt-get	50.38 KB	-rwxr-xr-x
apt-key	27.32 KB	-rwxr-xr-x
apt-listchanges	11.96 KB	-rwxr-xr-x
apt-mark	58.38 KB	-rwxr-xr-x
apt-sortpkgs	38.32 KB	-rwxr-xr-x
ar	51.17 KB	-rwxr-xr-x
arch	42.86 KB	-rwxr-xr-x
as	897.41 KB	-rwxr-xr-x
at	58.37 KB	-rwsr-sr-x
atq	58.37 KB	-rwsr-sr-x
atrm	58.37 KB	-rwsr-sr-x
autoconf	14.85 KB	-rwxr-xr-x
autoheader	8.82 KB	-rwxr-xr-x
autom4te	32.69 KB	-rwxr-xr-x
autoreconf	26.3 KB	-rwxr-xr-x
autoscan	16.77 KB	-rwxr-xr-x
autoupdate	33.22 KB	-rwxr-xr-x
awk	154.66 KB	-rwxr-xr-x
aws	815 B	-rwxr-xr-x
b2sum	58.98 KB	-rwxr-xr-x
base32	46.89 KB	-rwxr-xr-x
base64	46.89 KB	-rwxr-xr-x
basename	42.83 KB	-rwxr-xr-x
basenc	54.89 KB	-rwxr-xr-x
bash	1.21 MB	-rwxr-xr-x
bashbug	6.7 KB	-rwxr-xr-x
batch	152 B	-rwxr-xr-x
bunzip2	38.3 KB	-rwxr-xr-x
busctl	90.5 KB	-rwxr-xr-x
bzcat	38.3 KB	-rwxr-xr-x
bzcmp	2.17 KB	-rwxr-xr-x
bzdiff	2.17 KB	-rwxr-xr-x
bzegrep	3.69 KB	-rwxr-xr-x
bzexe	4.78 KB	-rwxr-xr-x
bzfgrep	3.69 KB	-rwxr-xr-x
bzgrep	3.69 KB	-rwxr-xr-x
bzip2	38.3 KB	-rwxr-xr-x
bzip2recover	14.23 KB	-rwxr-xr-x
bzless	1.27 KB	-rwxr-xr-x
bzmore	1.27 KB	-rwxr-xr-x
c++	1.25 MB	-rwxr-xr-x
c++filt	18.51 KB	-rwxr-xr-x
c89	428 B	-rwxr-xr-x
c89-gcc	428 B	-rwxr-xr-x
c99	454 B	-rwxr-xr-x
c99-gcc	454 B	-rwxr-xr-x
c_rehash	6.73 KB	-rwxr-xr-x
cal	36.84 KB	-rwxr-xr-x
captoinfo	90.34 KB	-rwxr-xr-x
cat	42.98 KB	-rwxr-xr-x
catman	42.77 KB	-rwxr-xr-x
cc	1.24 MB	-rwxr-xr-x
chacl	14.23 KB	-rwxr-xr-x
chage	78.49 KB	-rwxr-sr-x
chardet	221 B	-rwxr-xr-x
chardetect	221 B	-rwxr-xr-x
chattr	14.24 KB	-rwxr-xr-x
chcon	67.11 KB	-rwxr-xr-x
chfn	61.2 KB	-rwsr-xr-x
chgrp	67.05 KB	-rwxr-xr-x
chmod	62.98 KB	-rwxr-xr-x
choom	54.31 KB	-rwxr-xr-x
chown	71.05 KB	-rwxr-xr-x
chrt	66.31 KB	-rwxr-xr-x
chsh	51.64 KB	-rwsr-xr-x
cksum	139.05 KB	-rwxr-xr-x
clear	14.24 KB	-rwxr-xr-x
clear_console	14.15 KB	-rwxr-xr-x
cloud-id	972 B	-rwxr-xr-x
cloud-init	976 B	-rwxr-xr-x
cloud-init-per	2.06 KB	-rwxr-xr-x
cloud-localds	7.21 KB	-rwxr-xr-x
cmp	50.95 KB	-rwxr-xr-x
col	34.31 KB	-rwxr-xr-x
colcrt	14.31 KB	-rwxr-xr-x
colrm	30.31 KB	-rwxr-xr-x
column	54.31 KB	-rwxr-xr-x
comm	46.92 KB	-rwxr-xr-x
corelist	15.01 KB	-rwxr-xr-x
cp	147.61 KB	-rwxr-xr-x
cpan	8.16 KB	-rwxr-xr-x
cpan5.36-x86_64-linux-gnu	8.18 KB	-rwxr-xr-x
cpio	158.56 KB	-rwxr-xr-x
cpp	1.24 MB	-rwxr-xr-x
cpp-12	1.24 MB	-rwxr-xr-x
crontab	42.63 KB	-rwxr-sr-x
csplit	119.17 KB	-rwxr-xr-x
ctstat	26.59 KB	-rwxr-xr-x
curl	274.22 KB	-rwxr-xr-x
cut	46.98 KB	-rwxr-xr-x
cvtsudoers	337.19 KB	-rwxr-xr-x
dash	122.7 KB	-rwxr-xr-x
date	119.05 KB	-rwxr-xr-x
dbus-cleanup-sockets	14.22 KB	-rwxr-xr-x
dbus-daemon	238.56 KB	-rwxr-xr-x
dbus-monitor	26.23 KB	-rwxr-xr-x
dbus-run-session	14.23 KB	-rwxr-xr-x
dbus-send	30.22 KB	-rwxr-xr-x
dbus-update-activation-environ...	14.22 KB	-rwxr-xr-x
dbus-uuidgen	14.22 KB	-rwxr-xr-x
dd	87.15 KB	-rwxr-xr-x
deb-systemd-helper	23.79 KB	-rwxr-xr-x
deb-systemd-invoke	6.09 KB	-rwxr-xr-x
debconf	2.79 KB	-rwxr-xr-x
debconf-apt-progress	11.27 KB	-rwxr-xr-x
debconf-communicate	608 B	-rwxr-xr-x
debconf-copydb	1.68 KB	-rwxr-xr-x
debconf-escape	647 B	-rwxr-xr-x
debconf-set-selections	2.92 KB	-rwxr-xr-x
debconf-show	1.78 KB	-rwxr-xr-x
debianbts	217 B	-rwxr-xr-x
delpart	30.31 KB	-rwxr-xr-x
delv	41.3 KB	-rwxr-xr-x
devdump	180.17 KB	-rwxr-xr-x
df	99.8 KB	-rwxr-xr-x
dh_autotools-dev_restoreconfig	1.79 KB	-rwxr-xr-x
dh_autotools-dev_updateconfig	1.81 KB	-rwxr-xr-x
dh_bash-completion	4.31 KB	-rwxr-xr-x
dh_installxmlcatalogs	9.22 KB	-rwxr-xr-x
diff	151.58 KB	-rwxr-xr-x
diff3	67.14 KB	-rwxr-xr-x
dig	142.77 KB	-rwxr-xr-x
dir	147.8 KB	-rwxr-xr-x
dircolors	50.92 KB	-rwxr-xr-x
dirname	38.83 KB	-rwxr-xr-x
dirsplit	16.74 KB	-rwxr-xr-x
dmesg	86.58 KB	-rwxr-xr-x
dnsdomainname	22.15 KB	-rwxr-xr-x
dnstap-read	18.33 KB	-rwxr-xr-x
docutils	960 B	-rwxr-xr-x
domainname	22.15 KB	-rwxr-xr-x
dpkg	310.64 KB	-rwxr-xr-x
dpkg-architecture	14.85 KB	-rwxr-xr-x
dpkg-buildflags	8.14 KB	-rwxr-xr-x
dpkg-buildpackage	32.63 KB	-rwxr-xr-x
dpkg-checkbuilddeps	7.45 KB	-rwxr-xr-x
dpkg-deb	166.52 KB	-rwxr-xr-x
dpkg-distaddfile	2.72 KB	-rwxr-xr-x
dpkg-divert	154.55 KB	-rwxr-xr-x
dpkg-genbuildinfo	18.48 KB	-rwxr-xr-x
dpkg-genchanges	17.39 KB	-rwxr-xr-x
dpkg-gencontrol	14.2 KB	-rwxr-xr-x
dpkg-gensymbols	10.65 KB	-rwxr-xr-x
dpkg-maintscript-helper	20.71 KB	-rwxr-xr-x
dpkg-mergechangelogs	8.88 KB	-rwxr-xr-x
dpkg-name	6.62 KB	-rwxr-xr-x
dpkg-parsechangelog	4.83 KB	-rwxr-xr-x
dpkg-query	158.58 KB	-rwxr-xr-x
dpkg-realpath	4.09 KB	-rwxr-xr-x
dpkg-scanpackages	8.47 KB	-rwxr-xr-x
dpkg-scansources	8.98 KB	-rwxr-xr-x
dpkg-shlibdeps	31.17 KB	-rwxr-xr-x
dpkg-source	22.91 KB	-rwxr-xr-x
dpkg-split	126.48 KB	-rwxr-xr-x
dpkg-statoverride	62.33 KB	-rwxr-xr-x
dpkg-trigger	86.48 KB	-rwxr-xr-x
dpkg-vendor	3.18 KB	-rwxr-xr-x
du	171.33 KB	-rwxr-xr-x
dwp	1.79 MB	-rwxr-xr-x
ec2-metadata	7.71 KB	-rwxr-xr-x
ec2metadata	8.38 KB	-rwxr-xr-x
echo	42.83 KB	-rwxr-xr-x
editor	280.74 KB	-rwxr-xr-x
egrep	41 B	-rwxr-xr-x
eject	82.16 KB	-rwxr-xr-x
elfedit	35.03 KB	-rwxr-xr-x
enc2xs	40.96 KB	-rwxr-xr-x
encguess	3 KB	-rwxr-xr-x
env	47.4 KB	-rwxr-xr-x
envsubst	34.31 KB	-rwxr-xr-x
eqn	205.42 KB	-rwxr-xr-x
ex	3.48 MB	-rwxr-xr-x
expand	42.92 KB	-rwxr-xr-x
expiry	30.45 KB	-rwxr-sr-x
expr	115.05 KB	-rwxr-xr-x
factor	83.2 KB	-rwxr-xr-x
faillog	22.53 KB	-rwxr-xr-x
fallocate	34.31 KB	-rwxr-xr-x
false	34.83 KB	-rwxr-xr-x
fgrep	41 B	-rwxr-xr-x
filan	96.02 KB	-rwxr-xr-x
file	26.48 KB	-rwxr-xr-x
fincore	34.36 KB	-rwxr-xr-x
find	219.58 KB	-rwxr-xr-x
findmnt	83.59 KB	-rwxr-xr-x
flock	34.39 KB	-rwxr-xr-x
fmt	46.89 KB	-rwxr-xr-x
fold	42.89 KB	-rwxr-xr-x
free	26.3 KB	-rwxr-xr-x
funzip	22.46 KB	-rwxr-xr-x
fuser	39.83 KB	-rwxr-xr-x
g++	1.25 MB	-rwxr-xr-x
g++-12	1.25 MB	-rwxr-xr-x
gcc	1.24 MB	-rwxr-xr-x
gcc-12	1.24 MB	-rwxr-xr-x
gcc-ar	34.54 KB	-rwxr-xr-x
gcc-ar-12	34.54 KB	-rwxr-xr-x
gcc-nm	34.54 KB	-rwxr-xr-x
gcc-nm-12	34.54 KB	-rwxr-xr-x
gcc-ranlib	34.54 KB	-rwxr-xr-x
gcc-ranlib-12	34.54 KB	-rwxr-xr-x
gcov	720.16 KB	-rwxr-xr-x
gcov-12	720.16 KB	-rwxr-xr-x
gcov-dump	568.02 KB	-rwxr-xr-x
gcov-dump-12	568.02 KB	-rwxr-xr-x
gcov-tool	588.09 KB	-rwxr-xr-x
gcov-tool-12	588.09 KB	-rwxr-xr-x
gencat	26.75 KB	-rwxr-xr-x
genisoimage	631.17 KB	-rwxr-xr-x
geqn	205.42 KB	-rwxr-xr-x
getconf	26.5 KB	-rwxr-xr-x
geteltorito	6.06 KB	-rwxr-xr-x
getent	35.47 KB	-rwxr-xr-x
getfacl	30.8 KB	-rwxr-xr-x
getopt	34.31 KB	-rwxr-xr-x
gettext	34.31 KB	-rwxr-xr-x
gettext.sh	5.07 KB	-rwxr-xr-x
git	3.54 MB	-rwxr-xr-x
git-receive-pack	3.54 MB	-rwxr-xr-x
git-shell	2.04 MB	-rwxr-xr-x
git-upload-archive	3.54 MB	-rwxr-xr-x
git-upload-pack	3.54 MB	-rwxr-xr-x
gmake	234.65 KB	-rwxr-xr-x
gold	2.99 MB	-rwxr-xr-x
gonit	8.2 MB	-rwxr-xr-x
gp-archive	159.06 KB	-rwxr-xr-x
gp-collect-app	175.27 KB	-rwxr-xr-x
gp-display-html	578.29 KB	-rwxr-xr-x
gp-display-src	150.81 KB	-rwxr-xr-x
gp-display-text	257.3 KB	-rwxr-xr-x
gpasswd	86.42 KB	-rwsr-xr-x
gpgv	463 KB	-rwxr-xr-x
gpic	220.27 KB	-rwxr-xr-x
gprof	108.35 KB	-rwxr-xr-x
gprofng	146.59 KB	-rwxr-xr-x
grep	198.39 KB	-rwxr-xr-x
grep-aptavail	52.54 KB	-rwxr-xr-x
grep-available	52.54 KB	-rwxr-xr-x
grep-dctrl	52.54 KB	-rwxr-xr-x
grep-debtags	52.54 KB	-rwxr-xr-x
grep-status	52.54 KB	-rwxr-xr-x
groff	125.45 KB	-rwxr-xr-x
grog	2.71 KB	-rwxr-xr-x
grops	185.86 KB	-rwxr-xr-x
grotty	137.48 KB	-rwxr-xr-x
groups	42.89 KB	-rwxr-xr-x
growpart	29.19 KB	-rwxr-xr-x
grub-editenv	374.16 KB	-rwxr-xr-x
grub-file	809.41 KB	-rwxr-xr-x
grub-fstest	931.13 KB	-rwxr-xr-x
grub-glue-efi	245.01 KB	-rwxr-xr-x
grub-kbdcomp	1.64 KB	-rwxr-xr-x
grub-menulst2cfg	229.05 KB	-rwxr-xr-x
grub-mkfont	273.66 KB	-rwxr-xr-x
grub-mkimage	354.2 KB	-rwxr-xr-x
grub-mklayout	249.29 KB	-rwxr-xr-x
grub-mknetdir	410.99 KB	-rwxr-xr-x
grub-mkpasswd-pbkdf2	257.35 KB	-rwxr-xr-x
grub-mkrelpath	244.7 KB	-rwxr-xr-x
grub-mkrescue	987.84 KB	-rwxr-xr-x
grub-mkstandalone	487.32 KB	-rwxr-xr-x
grub-mount	754.05 KB	-rwxr-xr-x
grub-render-label	822.01 KB	-rwxr-xr-x
grub-script-check	272.82 KB	-rwxr-xr-x
grub-syslinux2cfg	770.52 KB	-rwxr-xr-x
gtbl	146.43 KB	-rwxr-xr-x
gunzip	2.29 KB	-rwxr-xr-x
gzexe	6.3 KB	-rwxr-xr-x
gzip	95.84 KB	-rwxr-xr-x
h2ph	28.54 KB	-rwxr-xr-x
h2xs	59.51 KB	-rwxr-xr-x
hardlink	50.39 KB	-rwxr-xr-x
hd	58.32 KB	-rwxr-xr-x
head	46.95 KB	-rwxr-xr-x
helpztags	2.46 KB	-rwxr-xr-x
hexdump	58.32 KB	-rwxr-xr-x
host	114.7 KB	-rwxr-xr-x
hostid	38.83 KB	-rwxr-xr-x
hostname	22.15 KB	-rwxr-xr-x
hostnamectl	30.38 KB	-rwxr-xr-x
i386	26.58 KB	-rwxr-xr-x
iconv	63.13 KB	-rwxr-xr-x
id	47.02 KB	-rwxr-xr-x
ifnames	4.08 KB	-rwxr-xr-x
infocmp	62.31 KB	-rwxr-xr-x
infotocap	90.34 KB	-rwxr-xr-x
install	155.8 KB	-rwxr-xr-x
instmodsh	4.27 KB	-rwxr-xr-x
ionice	34.31 KB	-rwxr-xr-x
ip	674.82 KB	-rwxr-xr-x
ipcmk	34.38 KB	-rwxr-xr-x
ipcrm	34.31 KB	-rwxr-xr-x
ipcs	74.31 KB	-rwxr-xr-x
iptables-xml	88.98 KB	-rwxr-xr-x
ischroot	14.32 KB	-rwxr-xr-x
isodump	180.17 KB	-rwxr-xr-x
isoinfo	343.42 KB	-rwxr-xr-x
isovfy	184.14 KB	-rwxr-xr-x
join	54.98 KB	-rwxr-xr-x
join-dctrl	35.13 KB	-rwxr-xr-x
journalctl	74.64 KB	-rwxr-xr-x
json-patch-jsondiff	1004 B	-rwxr-xr-x
json_pp	4.88 KB	-rwxr-xr-x
jsondiff	1004 B	-rwxr-xr-x
jsonpatch	3.77 KB	-rwxr-xr-x
jsonpointer	1.79 KB	-rwxr-xr-x
jsonschema	213 B	-rwxr-xr-x
kernel-install	12.75 KB	-rwxr-xr-x
kill	22.3 KB	-rwxr-xr-x
killall	31.95 KB	-rwxr-xr-x
kmod	174.27 KB	-rwxr-xr-x
last	50.31 KB	-rwxr-xr-x
lastb	50.31 KB	-rwxr-xr-x
lastlog	31.75 KB	-rwxr-xr-x
lcf	7.6 KB	-rwxr-xr-x
ld	1.27 MB	-rwxr-xr-x
ld.bfd	1.27 MB	-rwxr-xr-x
ld.gold	2.99 MB	-rwxr-xr-x
ld.so	209.96 KB	-rwxr-xr-x
ldd	5.28 KB	-rwxr-xr-x
less	194.3 KB	-rwxr-xr-x
lessecho	14.24 KB	-rwxr-xr-x
lessfile	8.83 KB	-rwxr-xr-x
lesskey	23.63 KB	-rwxr-xr-x
lesspipe	8.83 KB	-rwxr-xr-x
lexgrog	107.48 KB	-rwxr-xr-x
lft	2.43 KB	-rwxr-xr-x
lft.db	2.43 KB	-rwxr-xr-x
libnetcfg	15.41 KB	-rwxr-xr-x
libtoolize	133.12 KB	-rwxr-xr-x
link	38.83 KB	-rwxr-xr-x
linux-check-removal	4.56 KB	-rwxr-xr-x
linux-update-symlinks	6.17 KB	-rwxr-xr-x
linux-version	2.63 KB	-rwxr-xr-x
linux32	26.58 KB	-rwxr-xr-x
linux64	26.58 KB	-rwxr-xr-x
ln	71.12 KB	-rwxr-xr-x
lnstat	26.59 KB	-rwxr-xr-x
locale	46.16 KB	-rwxr-xr-x
localectl	26.38 KB	-rwxr-xr-x
localedef	291.91 KB	-rwxr-xr-x
logger	54.9 KB	-rwxr-xr-x
login	51.78 KB	-rwxr-xr-x
loginctl	58.48 KB	-rwxr-xr-x
logname	38.83 KB	-rwxr-xr-x
look	18.31 KB	-rwxr-xr-x
ls	147.8 KB	-rwxr-xr-x
lsattr	14.24 KB	-rwxr-xr-x
lsb_release	2.59 KB	-rwxr-xr-x
lsblk	202.31 KB	-rwxr-xr-x
lscpu	126.31 KB	-rwxr-xr-x
lsfd	120.3 KB	-rwxr-xr-x
lsinitramfs	735 B	-rwxr-xr-x
lsipc	98.31 KB	-rwxr-xr-x
lsirq	34.48 KB	-rwxr-xr-x
lslocks	70.7 KB	-rwxr-xr-x
lslogins	94.31 KB	-rwxr-xr-x
lsmem	66.31 KB	-rwxr-xr-x
lsmod	174.27 KB	-rwxr-xr-x
lsns	82.31 KB	-rwxr-xr-x
lspci	104.04 KB	-rwxr-xr-x
lto-dump	30.47 MB	-rwxr-xr-x
lto-dump-12	30.47 MB	-rwxr-xr-x
lzcat	82.7 KB	-rwxr-xr-x
lzcmp	7.25 KB	-rwxr-xr-x
lzdiff	7.25 KB	-rwxr-xr-x
lzegrep	10.09 KB	-rwxr-xr-x
lzfgrep	10.09 KB	-rwxr-xr-x
lzgrep	10.09 KB	-rwxr-xr-x
lzless	1.77 KB	-rwxr-xr-x
lzma	82.7 KB	-rwxr-xr-x
lzmainfo	14.3 KB	-rwxr-xr-x
lzmore	2.14 KB	-rwxr-xr-x
m4	271.52 KB	-rwxr-xr-x
make	234.65 KB	-rwxr-xr-x
make-first-existing-target	4.79 KB	-rwxr-xr-x
man	121.36 KB	-rwxr-xr-x
man-recode	35.38 KB	-rwxr-xr-x
mandb	147.61 KB	-rwxr-xr-x
manpath	34.78 KB	-rwxr-xr-x
markdown-it	220 B	-rwxr-xr-x
mawk	154.66 KB	-rwxr-xr-x
mcookie	34.38 KB	-rwxr-xr-x
md5sum	50.95 KB	-rwxr-xr-x
md5sum.textutils	50.95 KB	-rwxr-xr-x
mdig	46.33 KB	-rwxr-xr-x
mesg	18.3 KB	-rwxr-xr-x
mkdir	95.27 KB	-rwxr-xr-x
mkfifo	67.17 KB	-rwxr-xr-x
mkisofs	631.17 KB	-rwxr-xr-x
mknod	71.2 KB	-rwxr-xr-x
mktemp	42.92 KB	-rwxr-xr-x
mkzftree	30.84 KB	-rwxr-xr-x
mokutil	60.27 KB	-rwxr-xr-x
monit	8.2 MB	-rwxr-xr-x
more	58.31 KB	-rwxr-xr-x
mount	58.3 KB	-rwsr-xr-x
mount-image-callback	13.86 KB	-rwxr-xr-x
mountpoint	18.3 KB	-rwxr-xr-x
mt	83.38 KB	-rwxr-xr-x
mt-gnu	83.38 KB	-rwxr-xr-x
mv	139.62 KB	-rwxr-xr-x
namei	34.31 KB	-rwxr-xr-x
nano	280.74 KB	-rwxr-xr-x
nawk	154.66 KB	-rwxr-xr-x
ncal	36.84 KB	-rwxr-xr-x
neqn	913 B	-rwxr-xr-x
netstat	151.66 KB	-rwxr-xr-x
networkctl	106.38 KB	-rwxr-xr-x
newgrp	47.75 KB	-rwsr-xr-x
ngettext	34.31 KB	-rwxr-xr-x
nice	42.86 KB	-rwxr-xr-x
nisdomainname	22.15 KB	-rwxr-xr-x
nl	111.11 KB	-rwxr-xr-x
nm	44.03 KB	-rwxr-xr-x
nohup	42.89 KB	-rwxr-xr-x
normalizer	244 B	-rwxr-xr-x
nproc	42.89 KB	-rwxr-xr-x
nroff	3.22 KB	-rwxr-xr-x
nsenter	34.54 KB	-rwxr-xr-x
nslookup	114.74 KB	-rwxr-xr-x
nstat	104.45 KB	-rwxr-xr-x
nsupdate	74.55 KB	-rwxr-xr-x
numfmt	67.02 KB	-rwxr-xr-x
objcopy	155.66 KB	-rwxr-xr-x
objdump	362.56 KB	-rwxr-xr-x
od	79.02 KB	-rwxr-xr-x
openssl	953.26 KB	-rwxr-xr-x
pager	194.3 KB	-rwxr-xr-x
partx	118.31 KB	-rwxr-xr-x
passwd	66.65 KB	-rwsr-xr-x
paste	42.89 KB	-rwxr-xr-x
patch	187.44 KB	-rwxr-xr-x
pathchk	42.86 KB	-rwxr-xr-x
pdb3	62.4 KB	-rwxr-xr-x
pdb3.11	62.4 KB	-rwxr-xr-x
peekfd	14.5 KB	-rwxr-xr-x
perl	3.63 MB	-rwxr-xr-x
perl5.36-x86_64-linux-gnu	14.41 KB	-rwxr-xr-x
perl5.36.0	3.63 MB	-rwxr-xr-x
perlbug	44.12 KB	-rwxr-xr-x
perldoc	125 B	-rwxr-xr-x
perlivp	10.61 KB	-rwxr-xr-x
perlthanks	44.12 KB	-rwxr-xr-x
pgrep	34.42 KB	-rwxr-xr-x
pic	220.27 KB	-rwxr-xr-x
pico	280.74 KB	-rwxr-xr-x
piconv	8.16 KB	-rwxr-xr-x
pidof	26.31 KB	-rwxr-xr-x
pidwait	34.42 KB	-rwxr-xr-x
ping	88.45 KB	-rwxr-xr-x
ping4	88.45 KB	-rwxr-xr-x
ping6	88.45 KB	-rwxr-xr-x
pinky	47.05 KB	-rwxr-xr-x
pkaction	18.23 KB	-rwxr-xr-x
pkcheck	22.3 KB	-rwxr-xr-x
pkill	34.42 KB	-rwxr-xr-x
pkttyagent	18.23 KB	-rwxr-xr-x
pl2pm	4.43 KB	-rwxr-xr-x
pldd	22.69 KB	-rwxr-xr-x
pmap	34.34 KB	-rwxr-xr-x
pod2html	4.04 KB	-rwxr-xr-x
pod2man	14.68 KB	-rwxr-xr-x
pod2text	10.55 KB	-rwxr-xr-x
pod2usage	4.01 KB	-rwxr-xr-x
podchecker	3.57 KB	-rwxr-xr-x
pr	79.11 KB	-rwxr-xr-x
preconv	66.43 KB	-rwxr-xr-x
printenv	34.83 KB	-rwxr-xr-x
printf	62.92 KB	-rwxr-xr-x
prlimit	38.83 KB	-rwxr-xr-x
procan	79.91 KB	-rwxr-xr-x
prove	13.34 KB	-rwxr-xr-x
prtstat	18.57 KB	-rwxr-xr-x
ps	142.93 KB	-rwxr-xr-x
pslog	14.45 KB	-rwxr-xr-x
pstree	35.78 KB	-rwxr-xr-x
pstree.x11	35.78 KB	-rwxr-xr-x
ptar	3.48 KB	-rwxr-xr-x
ptardiff	2.58 KB	-rwxr-xr-x
ptargrep	4.29 KB	-rwxr-xr-x
ptx	135.23 KB	-rwxr-xr-x
pwd	42.92 KB	-rwxr-xr-x
pwdx	14.3 KB	-rwxr-xr-x
py3clean	7.63 KB	-rwxr-xr-x
py3compile	13 KB	-rwxr-xr-x

Code Editor : zipdetails

#!/usr/bin/perl
    eval 'exec /usr/bin/perl -S $0 ${1+"$@"}'
	if 0; # ^ Run only under a shell
#!/usr/bin/perl

# zipdetails
#
# Display info on the contents of a Zip file
#

use 5.010; # for unpack "Q<"

BEGIN {
    # Check for a 32-bit Perl
    if (!eval { pack "Q", 1 }) {
        warn "zipdetails requires 64 bit integers, ",
                "this Perl has 32 bit integers.\n";
        exit(1);
    }
}

BEGIN { pop @INC if $INC[-1] eq '.' }
use strict;
use warnings ;
no  warnings 'portable'; # for unpacking > 2^32
use feature 'state';

use IO::File;
use Encode;
use Getopt::Long;

my $VERSION = "2.104" ;

use constant MAX32 => 0xFFFFFFFF ;

# Compression types
use constant ZIP_CM_STORE                      => 0 ;
use constant ZIP_CM_IMPLODE                    => 6 ;
use constant ZIP_CM_DEFLATE                    => 8 ;
use constant ZIP_CM_BZIP2                      => 12 ;
use constant ZIP_CM_LZMA                       => 14 ;
use constant ZIP_CM_PPMD                       => 98 ;

# General Purpose Flag
use constant ZIP_GP_FLAG_ENCRYPTED_MASK        => (1 << 0) ;
use constant ZIP_GP_FLAG_STREAMING_MASK        => (1 << 3) ;
use constant ZIP_GP_FLAG_PATCHED_MASK          => (1 << 5) ;
use constant ZIP_GP_FLAG_STRONG_ENCRYPTED_MASK => (1 << 6) ;
use constant ZIP_GP_FLAG_LZMA_EOS_PRESENT      => (1 << 1) ;
use constant ZIP_GP_FLAG_LANGUAGE_ENCODING     => (1 << 11) ;

# Internal File Attributes
use constant ZIP_IFA_TEXT_MASK                 => 1;

# Signatures for each of the headers
use constant ZIP_LOCAL_HDR_SIG                 => 0x04034b50;
use constant ZIP_DATA_HDR_SIG                  => 0x08074b50;
use constant ZIP_CENTRAL_HDR_SIG               => 0x02014b50;
use constant ZIP_END_CENTRAL_HDR_SIG           => 0x06054b50;
use constant ZIP64_END_CENTRAL_REC_HDR_SIG     => 0x06064b50;
use constant ZIP64_END_CENTRAL_LOC_HDR_SIG     => 0x07064b50;
use constant ZIP_ARCHIVE_EXTRA_DATA_SIG        => 0x08064b50;
use constant ZIP_DIGITAL_SIGNATURE_SIG         => 0x05054b50;

use constant ZIP_ARCHIVE_EXTRA_DATA_RECORD_SIG => 0x08064b50;

# Extra sizes
use constant ZIP_EXTRA_HEADER_SIZE          => 2 ;
use constant ZIP_EXTRA_MAX_SIZE             => 0xFFFF ;
use constant ZIP_EXTRA_SUBFIELD_ID_SIZE     => 2 ;
use constant ZIP_EXTRA_SUBFIELD_LEN_SIZE    => 2 ;
use constant ZIP_EXTRA_SUBFIELD_HEADER_SIZE => ZIP_EXTRA_SUBFIELD_ID_SIZE +
                                               ZIP_EXTRA_SUBFIELD_LEN_SIZE;
use constant ZIP_EXTRA_SUBFIELD_MAX_SIZE    => ZIP_EXTRA_MAX_SIZE -
                                               ZIP_EXTRA_SUBFIELD_HEADER_SIZE;

my %ZIP_CompressionMethods =
    (
          0 => 'Stored',
          1 => 'Shrunk',
          2 => 'Reduced compression factor 1',
          3 => 'Reduced compression factor 2',
          4 => 'Reduced compression factor 3',
          5 => 'Reduced compression factor 4',
          6 => 'Imploded',
          7 => 'Reserved for Tokenizing compression algorithm',
          8 => 'Deflated',
          9 => 'Enhanced Deflating using Deflate64(tm)',
         10 => 'PKWARE Data Compression Library Imploding',
         11 => 'Reserved by PKWARE',
         12 => 'BZIP2',
         13 => 'Reserved by PKWARE',
         14 => 'LZMA',
         15 => 'Reserved by PKWARE',
         16 => 'IBM z/OS CMPSC Compression',
         17 => 'Reserved by PKWARE',
         18 => 'File is compressed using IBM TERSE (new)',
         19 => 'IBM LZ77 z Architecture (PFS)',
         93 => 'Zstandard',
         94 => 'MP3',
         95 => 'XZ',
         96 => 'WinZip JPEG Compression',
         97 => 'WavPack compressed data',
         98 => 'PPMd version I, Rev 1',
         99 => 'AES Encryption',
     );

my %OS_Lookup = (
    0   => "MS-DOS",
    1   => "Amiga",
    2   => "OpenVMS",
    3   => "Unix",
    4   => "VM/CMS",
    5   => "Atari ST",
    6   => "HPFS (OS/2, NT 3.x)",
    7   => "Macintosh",
    8   => "Z-System",
    9   => "CP/M",
    10  => "Windows NTFS or TOPS-20",
    11  => "MVS or NTFS",
    12  => "VSE or SMS/QDOS",
    13  => "Acorn RISC OS",
    14  => "VFAT",
    15  => "alternate MVS",
    16  => "BeOS",
    17  => "Tandem",
    18  => "OS/400",
    19  => "OS/X (Darwin)",
    30  => "AtheOS/Syllable",
    );

my %Lookup = (
    ZIP_LOCAL_HDR_SIG,             \&LocalHeader,
    ZIP_DATA_HDR_SIG,              \&DataHeader,
    ZIP_CENTRAL_HDR_SIG,           \&CentralHeader,
    ZIP_END_CENTRAL_HDR_SIG,       \&EndCentralHeader,
    ZIP64_END_CENTRAL_REC_HDR_SIG, \&Zip64EndCentralHeader,
    ZIP64_END_CENTRAL_LOC_HDR_SIG, \&Zip64EndCentralLocator,

# TODO - Archive Encryption Headers & digital signature
    #ZIP_ARCHIVE_EXTRA_DATA_RECORD_SIG
    #ZIP_DIGITAL_SIGNATURE_SIG
    #ZIP_ARCHIVE_EXTRA_DATA_SIG
);

my %Extras = (
      0x0001,  ['ZIP64', \&decode_Zip64],
      0x0007,  ['AV Info', undef],
      0x0008,  ['Extended Language Encoding', undef],
      0x0009,  ['OS/2 extended attributes', undef],
      0x000a,  ['NTFS FileTimes', \&decode_NTFS_Filetimes],
      0x000c,  ['OpenVMS', undef],
      0x000d,  ['Unix', undef],
      0x000e,  ['Stream & Fork Descriptors', undef],
      0x000f,  ['Patch Descriptor', undef],
      0x0014,  ['PKCS#7 Store for X.509 Certificates', undef],
      0x0015,  ['X.509 Certificate ID and Signature for individual file', undef],
      0x0016,  ['X.509 Certificate ID for Central Directory', undef],
      0x0017,  ['Strong Encryption Header', undef],
      0x0018,  ['Record Management Controls', undef],
      0x0019,  ['PKCS#7 Encryption Recipient Certificate List', undef],
      0x0020,  ['Reserved for Timestamp record', undef],
      0x0021,  ['Policy Decryption Key Record', undef],
      0x0022,  ['Smartcrypt Key Provider Record', undef],
      0x0023,  ['Smartcrypt Policy Key Data Record', undef],

# The Header ID mappings defined by Info-ZIP and third parties are:

0x0065,  ['IBM S/390 attributes - uncompressed', \&decodeMVS],
      0x0066,  ['IBM S/390 attributes - compressed', undef],
      0x07c8,  ['Info-ZIP Macintosh (old, J. Lee)', undef],
      0x2605,  ['ZipIt Macintosh (first version)', undef],
      0x2705,  ['ZipIt Macintosh v 1.3.5 and newer (w/o full filename)', undef],
      0x2805,  ['ZipIt Macintosh v 1.3.5 and newer', undef],
      0x334d,  ["Info-ZIP Macintosh (new, D. Haase's 'Mac3' field)", undef],
      0x4154,  ['Tandem NSK', undef],
      0x4341,  ['Acorn/SparkFS (David Pilling)', undef],
      0x4453,  ['Windows NT security descriptor', \&decode_NT_security],
      0x4690,  ['POSZIP 4690', undef],
      0x4704,  ['VM/CMS', undef],
      0x470f,  ['MVS', undef],
      0x4854,  ['Theos, old inofficial port', undef],
      0x4b46,  ['FWKCS MD5 (see below)', undef],
      0x4c41,  ['OS/2 access control list (text ACL)', undef],
      0x4d49,  ['Info-ZIP OpenVMS (obsolete)', undef],
      0x4d63,  ['Macintosh SmartZIP, by Macro Bambini', undef],
      0x4f4c,  ['Xceed original location extra field', undef],
      0x5356,  ['AOS/VS (binary ACL)', undef],
      0x5455,  ['Extended Timestamp', \&decode_UT],
      0x554e,  ['Xceed unicode extra field', \&decode_Xceed_unicode],
      0x5855,  ['Info-ZIP Unix (original; also OS/2, NT, etc.)', \&decode_UX],
      0x5a4c,  ['ZipArchive Unicode Filename', undef],
      0x5a4d,  ['ZipArchive Offsets Array', undef],
      0x6375,  ['Info-ZIP Unicode Comment', \&decode_up ],
      0x6542,  ['BeOS (BeBox, PowerMac, etc.)', undef],
      0x6854,  ['Theos', undef],
      0x7075,  ['Info-ZIP Unicode Path', \&decode_up ],
      0x756e,  ['ASi Unix', undef],
      0x7441,  ['AtheOS (AtheOS/Syllable attributes)', undef],
      0x7855,  ['Unix Extra type 2', \&decode_Ux],
      0x7875,  ['Unix Extra Type 3', \&decode_ux],
      0x9901,  ['AES Encryption', \&decode_AES],
      0xa11e,  ['Data Stream Alignment', \&decode_DataStreamAlignment],
      0xA220,  ['Open Packaging Growth Hint', \&decode_GrowthHint ],
      0xCAFE,  ['Java Executable', \&decode_Java_exe],
      0xfb4a,  ['SMS/QDOS', undef],

);

my $FH;

my $ZIP64 = 0 ;
my $NIBBLES = 8;
my $LocalHeaderCount = 0;
my $CentralHeaderCount = 0;

my $START;
my $OFFSET = 0 ;
my $TRAILING = 0 ;
my $PAYLOADLIMIT = 256;
my $ZERO = 0 ;
my $APK = 0 ;
my $START_APK = 0;
my $APK_LEN = 0;

my $SEEN = Seen->new();

sub prOff
{
    my $offset = shift;
    my $s = offset($OFFSET);
    $OFFSET += $offset;
    return $s;
}

sub offset
{
    my $v = shift ;

sprintf("%0${NIBBLES}X", $v);
}

my ($OFF,  $LENGTH,  $CONTENT, $TEXT, $VALUE) ;

my $FMT1 ;
my $FMT2 ;

sub setupFormat
{
    my $wantVerbose = shift ;
    my $nibbles = shift;

my $width = '@' . ('>' x ($nibbles -1));
    my $space = " " x length($width);

my $fmt ;

if ($wantVerbose) {

$FMT1 = "
        format STDOUT =
$width $width ^<<<<<<<<<<<^<<<<<<<<<<<<<<<<<<<< ^<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
\$OFF,     \$LENGTH,  \$CONTENT, \$TEXT,               \$VALUE
$space $space ^<<<<<<<<<<<^<<<<<<<<<<<<<<<<<<<< ^<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<~~
                    \$CONTENT, \$TEXT,               \$VALUE
.
";

$FMT2 = "
        format STDOUT =
$width $width ^<<<<<<<<<<<  ^<<<<<<<<<<<<<<<<<< ^<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
\$OFF,     \$LENGTH,  \$CONTENT, \$TEXT,               \$VALUE
$space $space ^<<<<<<<<<<<  ^<<<<<<<<<<<<<<<<<< ^<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<~~
              \$CONTENT, \$TEXT,               \$VALUE
.  " ;

}
    else {

$FMT1 = "
        format STDOUT =
$width ^<<<<<<<<<<<<<<<<<<<< ^<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
\$OFF,      \$TEXT,               \$VALUE
$space ^<<<<<<<<<<<<<<<<<<<< ^<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<~~
                    \$TEXT,               \$VALUE
.
";

$FMT2 = "
    format STDOUT =
$width   ^<<<<<<<<<<<<<<<<<< ^<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
\$OFF,     \$TEXT,               \$VALUE
$space   ^<<<<<<<<<<<<<<<<<< ^<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<~~
                    \$TEXT,               \$VALUE
.
" ;
    }

eval "$FMT1";

$| = 1;

}

sub mySpr
{
    my $format = shift ;

return "" if ! defined $format;
    return $format unless @_ ;
    return sprintf $format, @_ ;
}

sub out0
{
    my $size = shift;
    my $text = shift;
    my $format = shift;

$OFF     = prOff($size);
    $LENGTH  = offset($size) ;
    $CONTENT = '...';
    $TEXT    = $text;
    $VALUE   = mySpr $format,  @_;

write;

skip($FH, $size);
}

sub xDump
{
    my $input = shift;

$input =~ tr/\0-\37\177-\377/./;
    return $input;
}

sub hexDump
{
    my $input = shift;

my $out = unpack('H*', $input) ;
    $out =~ s#(..)# $1#g ;
    $out =~ s/^ //;
    $out = uc $out;

return $out;
}

sub hexValue
{
    return sprintf("%X", $_[0]);
}

sub out
{
    my $data = shift;
    my $text = shift;
    my $format = shift;

my $size = length($data) ;

$OFF     = prOff($size);
    $LENGTH  = offset($size) ;
    $CONTENT = hexDump($data);
    $TEXT    = $text;
    $VALUE   = mySpr $format,  @_;

no warnings;

write;
}

sub out1
{
    my $text = shift;
    my $format = shift;

$OFF     = '';
    $LENGTH  = '' ;
    $CONTENT = '';
    $TEXT    = $text;
    $VALUE   = mySpr $format,  @_;

write;
}

sub out2
{
    my $data = shift ;
    my $text = shift ;
    my $format = shift;

my $size = length($data) ;
    $OFF     = prOff($size);
    $LENGTH  = offset($size);
    $CONTENT = hexDump($data);
    $TEXT    = $text;
    $VALUE   = mySpr $format,  @_;

no warnings;
    eval "$FMT2";
    write ;
    eval "$FMT1";
}

sub Value
{
    my $letter = shift;
    my @value = @_;

if ($letter eq 'C')
      { return Value_C(@value) }
    elsif ($letter eq 'v')
      { return Value_v(@value) }
    elsif ($letter eq 'V')
      { return Value_V(@value) }
    elsif ($letter eq 'Q<')
      { return Value_Q(@value) }
    else
      { die "here letter $letter"}
}

sub outer
{
    my $name = shift ;
    my $unpack = shift ;
    my $size = shift ;
    my $cb1  = shift ;
    my $cb2  = shift ;

myRead(my $buff, $size);
    my (@value) = unpack $unpack, $buff;
    my $hex = Value($unpack,  @value);

if (defined $cb1) {
        my $v ;
        if (ref $cb1 eq 'CODE') {
            $v = $cb1->(@value) ;
        }
        else {
            $v = $cb1 ;
        }

$v = "'" . $v unless $v =~ /^'/;
        $v .= "'"     unless $v =~ /'$/;
        $hex .= " $v" ;
    }

out $buff, $name, $hex ;

$cb2->(@value)
        if defined $cb2 ;

return $value[0];
}

sub out_C
{
    my $name = shift ;
    my $cb1  = shift ;
    my $cb2  = shift ;

outer($name, 'C', 1, $cb1, $cb2);
}

sub out_v
{
    my $name = shift ;
    my $cb1  = shift ;
    my $cb2  = shift ;

outer($name, 'v', 2, $cb1, $cb2);
}

sub out_V
{
    my $name = shift ;
    my $cb1  = shift ;
    my $cb2  = shift ;

outer($name, 'V', 4, $cb1, $cb2);
}

sub out_Q
{
    my $name = shift ;
    my $cb1  = shift ;
    my $cb2  = shift ;

outer($name, 'Q<', 8, $cb1, $cb2);
}

sub outSomeData
{
    my $size = shift;
    my $message = shift;
    my $redact = shift ;

if ($size > 0) {
        if ($size > $PAYLOADLIMIT) {
            my $before = $FH->tell();
            out0 $size, $message;
        } else {
            myRead(my $buffer, $size );
            $buffer = "X" x $size
                if $redact;
            out $buffer, $message, xDump $buffer ;
        }
    }
}

sub unpackValue_C
{
    Value_v(unpack "C", $_[0]);
}

sub Value_C
{
    sprintf "%02X", $_[0];
}

sub unpackValue_v
{
    Value_v(unpack "v", $_[0]);
}

sub Value_v
{
    sprintf "%04X", $_[0];
}

sub unpackValue_V
{
    Value_V(unpack "V", $_[0]);
}

sub Value_V
{
    my $v = defined $_[0] ? $_[0] : 0;
    sprintf "%08X", $v;
}

sub unpackValue_Q
{
    my $v = unpack ("Q<", $_[0]);
    Value_Q($v);
}

sub Value_Q
{
    my $v = shift ;
    sprintf "%016X", $v;
}

sub read_Q
{
    my $b ;
    myRead($b, 8);
    return ($b, unpack ("Q<" , $b));
}

sub read_V
{
    my $b ;
    myRead($b, 4);
    return ($b, unpack ("V", $b));
}

sub read_v
{
    my $b ;
    myRead($b, 2);
    return ($b, unpack "v", $b);
}

sub read_C
{
    my $b ;
    myRead($b, 1);
    return ($b, unpack "C", $b);
}

sub seekTo
{
    my $offset = shift ;
    my $loc = shift ;

$loc = SEEK_SET
        if ! defined $loc ;

$FH->seek($offset, $loc);
    $OFFSET = $FH->tell();
}

sub scanForSignature
{
    my %sigs =
        map { $_ => 1         }
        map { substr $_, 2, 2 } # don't want the initial "PK"
        map { pack "V", $_    }
        (
                ZIP_LOCAL_HDR_SIG                 ,
                ZIP_DATA_HDR_SIG                  ,
                ZIP_CENTRAL_HDR_SIG               ,
                ZIP_END_CENTRAL_HDR_SIG           ,
                ZIP64_END_CENTRAL_REC_HDR_SIG     ,
                ZIP64_END_CENTRAL_LOC_HDR_SIG     ,
                # ZIP_ARCHIVE_EXTRA_DATA_SIG        ,
                # ZIP_DIGITAL_SIGNATURE_SIG         ,
                # ZIP_ARCHIVE_EXTRA_DATA_RECORD_SIG ,
        );

my $start = $FH->tell();

my $last = '';
    my $offset = 0;
    my $buffer ;
    BUFFER:
    while ($FH->read($buffer, 1024 * 1000))
    {
        my $combine = $last . $buffer ;

my $ix = 0;
        while (1)
        {
            $ix = index($combine, "PK", $ix) ;

if ($ix == -1)
            {
                $last = '';
                next BUFFER;
            }

my $rest = substr($combine, $ix + 2, 2);

if (! $sigs{$rest})
            {
                $ix += 2;
                next;
            }

# possible match
            my $here = $FH->tell();
            seekTo($here - length($combine) + $ix);

return 1;
        }

$last = substr($combine, $ix+4);
    }

return 0;
}

my $is64In32 = 0;

my $opt_verbose = 0;
my $opt_scan = 0;
my $opt_Redact = 0;
my $opt_utc = 0;

$Getopt::Long::bundling = 1 ;

GetOptions("h"       => \&Usage,
           "v"       => \$opt_verbose,
           "scan"    => \$opt_scan,
           "redact"  => \$opt_Redact,
           "utc"     => \$opt_utc,
           "version" => sub { print "$VERSION\n"; exit },
    )
  or Usage("Invalid command line option\n");

Usage("No zipfile") unless @ARGV == 1;

my $filename = shift @ARGV;

die "$filename does not exist\n"
    unless -e $filename ;

die "$filename not a standard file\n"
    unless -f $filename ;

$FH = IO::File->new( "<$filename" )
    or die "Cannot open $filename: $!\n";

my $FILELEN = -s $filename ;
$TRAILING = -s $filename ;
$NIBBLES = nibbles(-s $filename) ;

die "$filename too short to be a zip file\n"
    if $FILELEN <  22 ;

setupFormat($opt_verbose, $NIBBLES);

if(0)
{
    # Sanity check that this is a Zip file
    my ($buffer, $signature) = read_V();

warn "$filename doesn't look like a zip file\n"
        if $signature != ZIP_LOCAL_HDR_SIG ;
    $FH->seek(0, SEEK_SET) ;
}

my @Messages = ();

if ($opt_scan)
{
    my $foundCentralHeader = 0;
    my $lastEndsAt = 0;

while(scanForSignature())
    {
        my $here = $FH->tell();

my ($buffer, $signature) = read_V();

# check for an APK header directly before the first central header
        if ($signature == ZIP_CENTRAL_HDR_SIG && $foundCentralHeader == 0)
        {
            $foundCentralHeader = 1;

($START_APK, $APK, $APK_LEN) = chckForAPKSigningBlock($FH, $here) ;

if ($START_APK)
            {
                seekTo($lastEndsAt+4);

scanApkBlock();
                seekTo($here);
                next;
            }

seekTo($here + 4);
        }

my $handler = $Lookup{$signature};
        $handler->($signature, $buffer);

$lastEndsAt = $FH->tell();

seekTo($here + 4) ;
    }

dislayMessages();
    exit;

}

our ($CdExists, $CdOffset, @CentralDirectory) = scanCentralDirectory($FH);

die "No Central Directory records found\n"
    if ! $CdExists ;

$OFFSET = 0 ;
$FH->seek(0, SEEK_SET) ;

outSomeData($START, "PREFIX DATA")
    if defined $START && $START > 0 ;

my $skippedFrom = 0 ;
my $skippedContent = 0 ;

while (1)
{
    last if $FH->eof();

my $here = $FH->tell();
    if ($here >= $TRAILING) {
        print "\n" ;
        outSomeData($FILELEN - $TRAILING, "TRAILING DATA");
        last;

}

my ($buffer, $signature) = read_V();

my $handler = $Lookup{$signature};

if (!defined $handler)
    {
        if (@CentralDirectory) {
            # Should be at offset that central directory says
            my $locOffset = $CentralDirectory[0][0];
            my $delta = $locOffset - $here ;

if ($here + 4 == $locOffset ) {
                for (0 .. 3) {
                    $FH->ungetc(ord(substr($buffer, $_, 1)))
                }
                outSomeData($delta, "UNEXPECTED PADDING");
                next;
            }
        }

if ($here < $CdOffset)
        {
            if ($APK)
            {
                scanApkBlock();
                next;
            }

# next
            #     if scanForSignature() ;

$skippedFrom = $FH->tell() ;
            $skippedContent = $CdOffset - $skippedFrom ;

printf "\nWARNING!\nZip local header not found at offset 0x%X\n", $skippedFrom;
            printf "Skipping 0x%x bytes to Central Directory...\n", $skippedContent;

push @Messages,
                sprintf("Expected Zip header not found at offset 0x%X, ", $skippedFrom) .
                sprintf("skipped 0x%X bytes\n", $skippedContent);

seekTo($CdOffset);

next;
        }
        else
        {
            printf "\n\nUnexpected END at offset %08X, value %s\n", $here, Value_V($signature);

last;
        }
    }

$ZIP64 = 0 if $signature != ZIP_DATA_HDR_SIG ;
    $handler->($signature, $buffer);
}

dislayMessages();

exit ;

sub dislayMessages
{
    $SEEN->short_summary();

$SEEN->summary();

if (@Messages)
    {
        my $count = scalar @Messages ;
        print "\nWARNINGS\n\n";
        print "* $_\n" for @Messages ;
    }

print "Done\n";
}

sub compressionMethod
{
    my $id = shift ;
    Value_v($id) . " '" . ($ZIP_CompressionMethods{$id} || "Unknown Method") . "'" ;
}

sub LocalHeader
{
    my $signature = shift ;
    my $data = shift ;

my $from_offset = $FH->tell() - 4;

print "\n";
    ++ $LocalHeaderCount;
    my $hexHdrCount = sprintf("%X", $LocalHeaderCount) ;
    out $data, "LOCAL HEADER #$hexHdrCount" , Value_V($signature);

my $buffer;

my ($loc, $CDcompressedLength, $cdZip64, $zip64Sizes, $cdIndex, $cdEntryOffset) ;
    if (! $opt_scan)
    {
        ($loc, $CDcompressedLength, $cdZip64, $zip64Sizes, $cdIndex, $cdEntryOffset) = @{ shift @CentralDirectory } ;
        # my $cdi = sprintf("%X", $cdIndex) ;
        # out1 "CENTRAL HEADER #$cdi", sprintf "Offset %s\n", Value_Q($cdEntryOffset);
    }

out_C  "Extract Zip Spec", \&decodeZipVer;
    out_C  "Extract OS", \&decodeOS;

my ($bgp, $gpFlag) = read_v();
    my ($bcm, $compressedMethod) = read_v();

out $bgp, "General Purpose Flag", Value_v($gpFlag) ;
    GeneralPurposeBits($compressedMethod, $gpFlag);

out $bcm, "Compression Method",   compressionMethod($compressedMethod) ;

out_V "Last Mod Time", sub { getTime(_dosToUnixTime($_[0])) };

my $filename ;
    myRead($filename, $filenameLength);
    outputFilename($filename);

my $cl64 = $compressedLength;
    my %ExtraContext = ();
    if ($extraLength)
    {
        my @z64 = ($uncompressedLength, $compressedLength, 1, 1);
        $ExtraContext{Zip64} = \@z64 ;
        $ExtraContext{InCentralDir} = 0;
        walkExtra($extraLength, \%ExtraContext);
    }

my @msg ;
    # if ($cdZip64 && ! $ZIP64)
    # {
    #     # Central directory said this was Zip64
    #     # some zip files don't have the Zip64 field in the local header
    #     # seems to be a streaming issue.
    #     push @msg, "Missing Zip64 extra field in Local Header #$hexHdrCount\n";

#     if (! $zip64Sizes)
    #     {
    #         # Central has a ZIP64 entry that doesn't have sizes
    #         # Local doesn't have a Zip 64 at all
    #         push @msg, "Unzip may complain about 'overlapped components' #$hexHdrCount\n";
    #     }
    #     else
    #     {
    #         $ZIP64 = 1
    #     }
    # }

my $size = 0;
    $size = printAes(\%ExtraContext)
        if $compressedMethod == 99 ;

$size += printLzmaProperties()
        if $compressedMethod == ZIP_CM_LZMA ;

$CDcompressedLength = $compressedLength
        if $opt_scan ;

$CDcompressedLength -= $size;

if ($CDcompressedLength) {
        outSomeData($CDcompressedLength, "PAYLOAD", $opt_Redact) ;
    }

if ($compressedMethod == 99) {
        my $auth ;
        myRead($auth, 10);
        out $auth, "AES Auth",  hexDump($auth);
    }

print "WARNING: $_"
        for @msg;

push @Messages, @msg ;

# $SEEN->save("LOCAL HEADER #" . sprintf("%X", $LocalHeaderCount), $filename, $from_offset, $from_offset + $CDcompressedLength);
}

sub redactFilename
{
    my $filename = shift;

# Redact everything apart from directory seperators
    $filename =~ s([^/])(X)g
        if $opt_Redact;

return $filename;
}

sub outputFilename
{
    my $filename = shift;

$filename = redactFilename($filename) ;

if (length $filename > 256)
    {
        my $f = substr($filename, 0, 256) ;
        out $f, "Filename",  "'". $f . "' ...";
    }
    else
    {
        out $filename, "Filename",  "'". $filename . "'";
    }
}

sub CentralHeader
{
    my $signature = shift ;
    my $data = shift ;

my $from_offset = $FH->tell() - 4;

++ $CentralHeaderCount;
    print "\n";
    out $data, "CENTRAL HEADER #" . sprintf("%X", $CentralHeaderCount) . "", Value_V($signature);
    my $buffer;

out_C "Created Zip Spec", \&decodeZipVer;
    out_C "Created OS", \&decodeOS;
    out_C "Extract Zip Spec", \&decodeZipVer;
    out_C "Extract OS", \&decodeOS;

my ($bgp, $gpFlag) = read_v();
    my ($bcm, $compressedMethod) = read_v();

out $bgp, "General Purpose Flag", Value_v($gpFlag) ;
    GeneralPurposeBits($compressedMethod, $gpFlag);

out $bcm, "Compression Method", compressionMethod($compressedMethod) ;

out_V "Last Mod Time", sub { getTime(_dosToUnixTime($_[0])) };

my $crc                = out_V "CRC";
    my $compressedLength   = out_V "Compressed Length";
    my $uncompressedLength = out_V "Uncompressed Length";
    my $filenameLength     = out_v "Filename Length";
    my $extraLength        = out_v "Extra Length";
    my $comment_length     = out_v "Comment Length";
    my $disk_start         = out_v "Disk Start";
    my $int_file_attrib    = out_v "Int File Attributes";

out1 "[Bit 0]",  $int_file_attrib & 1 ? "1 Text Data" : "0 'Binary Data'";

my $ext_file_attrib    = out_V "Ext File Attributes";
    out1 "[Bit 0]",  "Read-Only"
        if $ext_file_attrib & 0x01 ;
    out1 "[Bit 1]",  "Hidden"
        if $ext_file_attrib & 0x02 ;
    out1 "[Bit 2]",  "System"
        if $ext_file_attrib & 0x04 ;
    out1 "[Bit 3]",  "Label"
        if $ext_file_attrib & 0x08 ;
    out1 "[Bit 4]",  "Directory"
        if $ext_file_attrib & 0x10 ;
    out1 "[Bit 5]",  "Archive"
        if $ext_file_attrib & 0x20 ;

my $lcl_hdr_offset     = out_V "Local Header Offset";

my $filename ;
    myRead($filename, $filenameLength);
    outputFilename($filename);

my %ExtraContext = ( CRC => $crc,
                         LocalHdrOffset   => $lcl_hdr_offset,
                         CompressedLength => $compressedLength);

if ($extraLength)
    {
        my @z64 = ($uncompressedLength, $compressedLength, $lcl_hdr_offset, $disk_start);
        $ExtraContext{Zip64} = \@z64 ;
        $ExtraContext{InCentralDir} = 1;
        walkExtra($extraLength, \%ExtraContext);
    }

if ($comment_length)
    {
        my $comment ;
        myRead($comment, $comment_length);
        out $comment, "Comment",  "'". $comment . "'";
    }

$SEEN->save("CENTRAL HEADER ref Local #" . sprintf("%X", $CentralHeaderCount), $filename, \%ExtraContext) ;
}

sub decodeZipVer
{
    my $ver = shift ;

my $sHi = int($ver /10) ;
    my $sLo = $ver % 10 ;

#out1 "Zip Spec", "$sHi.$sLo";
    "$sHi.$sLo";
}

sub decodeOS
{
    my $ver = shift ;

$OS_Lookup{$ver} || "Unknown" ;
}

sub Zip64EndCentralHeader
{
    my $signature = shift ;
    my $data = shift ;

print "\n";
    out $data, "ZIP64 END CENTRAL DIR RECORD", Value_V($signature);

my $buff;
    myRead($buff, 8);

out $buff, "Size of record", unpackValue_Q($buff);

my $size  = unpack "Q<", $buff;

out_C  "Created Zip Spec", \&decodeZipVer;
    out_C  "Created OS", \&decodeOS;
    out_C  "Extract Zip Spec", \&decodeZipVer;
    out_C  "Extract OS", \&decodeOS;
    out_V  "Number of this disk";
    out_V  "Central Dir Disk no";
    out_Q  "Entries in this disk";
    out_Q  "Total Entries";
    out_Q  "Size of Central Dir";
    out_Q  "Offset to Central dir";

# TODO -
    if ($size != 44)
    {
        push @Messages,  "Unsupported Size field in Zip64EndCentralHeader: should be 44, got $size\n"
    }
}

sub Zip64EndCentralLocator
{
    my $signature = shift ;
    my $data = shift ;

print "\n";
    out $data, "ZIP64 END CENTRAL DIR LOCATOR", Value_V($signature);

out_V  "Central Dir Disk no";
    out_Q  "Offset to Central dir";
    out_V  "Total no of Disks";
}

sub EndCentralHeader
{
    my $signature = shift ;
    my $data = shift ;

print "\n";
    out $data, "END CENTRAL HEADER", Value_V($signature);

out_v "Number of this disk";
    out_v "Central Dir Disk no";
    out_v "Entries in this disk";
    out_v "Total Entries";
    out_V "Size of Central Dir";
    out_V "Offset to Central Dir";
    my $comment_length = out_v "Comment Length";

if ($comment_length)
    {
        my $comment ;
        myRead($comment, $comment_length);
        out $comment, "Comment", "'$comment'";
    }
}

sub DataHeader
{
    my $signature = shift ;
    my $data = shift ;

print "\n";
    out $data, "STREAMING DATA HEADER", Value_V($signature);

out_V "CRC";

if ($ZIP64)
    {
        out_Q "Compressed Length" ;
        out_Q "Uncompressed Length" ;
    }
    else
    {
        out_V "Compressed Length" ;
        out_V "Uncompressed Length" ;
    }
}

sub GeneralPurposeBits
{
    my $method = shift;
    my $gp = shift;

out1 "[Bit  0]", "1 'Encryption'" if $gp & ZIP_GP_FLAG_ENCRYPTED_MASK;

my %lookup = (
        0 =>    "Normal Compression",
        1 =>    "Maximum Compression",
        2 =>    "Fast Compression",
        3 =>    "Super Fast Compression");

if ($method == ZIP_CM_DEFLATE)
    {
        my $mid = ($gp >> 1) & 0x03 ;

out1 "[Bits 1-2]", "$mid '$lookup{$mid}'";
    }

if ($method == ZIP_CM_LZMA)
    {
        if ($gp & ZIP_GP_FLAG_LZMA_EOS_PRESENT) {
            out1 "[Bit 1]", "1 'LZMA EOS Marker Present'" ;
        }
        else {
            out1 "[Bit 1]", "0 'LZMA EOS Marker Not Present'" ;
        }
    }

if ($method == ZIP_CM_IMPLODE) # Imploding
    {
        out1 "[Bit 1]", ($gp & (1 << 1) ? "1 '8k" : "0 '4k") . " Sliding Dictionary'" ;
        out1 "[Bit 2]", ($gp & (2 << 1) ? "1 '3" : "0 '2"  ) . " Shannon-Fano Trees'" ;
    }

out1 "[Bit  3]", "1 'Streamed'"           if $gp & ZIP_GP_FLAG_STREAMING_MASK;
    out1 "[Bit  4]", "1 'Enhanced Deflating'" if $gp & 1 << 4;
    out1 "[Bit  5]", "1 'Compressed Patched'" if $gp & 1 << 5 ;
    out1 "[Bit  6]", "1 'Strong Encryption'"  if $gp & ZIP_GP_FLAG_STRONG_ENCRYPTED_MASK;
    out1 "[Bit 11]", "1 'Language Encoding'"  if $gp & ZIP_GP_FLAG_LANGUAGE_ENCODING;
    out1 "[Bit 12]", "1 'Pkware Enhanced Compression'"  if $gp & 1 <<12 ;
    out1 "[Bit 13]", "1 'Encrypted Central Dir'"  if $gp & 1 <<13 ;

return ();
}

sub seekSet
{
    my $fh = $_[0] ;
    my $size = $_[1];

use Fcntl qw(SEEK_SET);
    seek($fh, $size, SEEK_SET);

}

sub skip
{
    my $fh = $_[0] ;
    my $size = $_[1];

use Fcntl qw(SEEK_CUR);
    seek($fh, $size, SEEK_CUR);

}

sub myRead
{
    my $got = \$_[0] ;
    my $size = $_[1];

my $wantSize = $size;
    $$got = '';

if ($size == 0)
    {
        return ;
    }

if ($size > 0)
    {
        my $buff ;
        my $status = $FH->read($buff, $size);
        return $status
            if $status < 0;
        $$got .= $buff ;
    }

my $len = length $$got;
    die "Truncated file (got $len, wanted $wantSize): $!\n"
        if length $$got != $wantSize;
}

sub walkExtra
{
    my $XLEN = shift;
    my $context = shift;

my $buff ;
    my $offset = 0 ;

my $id;
    my $subLen;
    my $payload ;

my $count = 0 ;

while ($offset < $XLEN) {

++ $count;

# Detect if there is not enough data for an extra ID and length.
        # Android zipalign and zipflinger are prime candidates for these
        # non-standard extra sub-fields.
        my $remaining = $XLEN - $offset;
        if ($remaining < ZIP_EXTRA_SUBFIELD_HEADER_SIZE) {
            # There is not enough left.
            # Consume whatever is there and return so parsing
            # can continue.
            myRead($payload, $remaining);
            my $data = hexDump($payload);

if ($payload =~ /^\x00+$/)
            {
                out $payload, "Null Padding in Extra";
            }
            else
            {
                out $payload, "Malformed Extra Data", $data;
            }

return undef;
        }

myRead($id, ZIP_EXTRA_SUBFIELD_ID_SIZE);
        $offset += ZIP_EXTRA_SUBFIELD_ID_SIZE;
        my $lookID = unpack "v", $id ;
        if ($lookID == 0)
        {
            # check for null padding at end of extra
            my $here = $FH->tell();
            my $rest;
            myRead($rest, $XLEN - $offset);
            if ($rest =~ /^\x00+$/)
            {
                out $id . $rest, "Null Padding in Extra";
                return undef;
            }

seekTo($here);
        }

my ($who, $decoder) =  @{ $Extras{$lookID} // ['', undef ] };

$who = "$id: $who"
            if $id =~ /\w\w/ ;

$who = "'$who'";
        out $id, "Extra ID #" . Value_v($count), unpackValue_v($id) . " $who" ;

myRead($buff, ZIP_EXTRA_SUBFIELD_LEN_SIZE);
        $offset += ZIP_EXTRA_SUBFIELD_LEN_SIZE;

$subLen =  unpack("v", $buff);
        out2 $buff, "Length", Value_v($subLen) ;

return undef
            if $offset + $subLen > $XLEN ;

if (! defined $decoder)
        {
            if ($subLen)
            {
                myRead($payload, $subLen);
                my $data = hexDump($payload);

out2 $payload, "Extra Payload", $data;
            }
        }
        else
        {
            $decoder->($subLen, $context) ;
        }

$offset += $subLen ;
    }

return undef ;
}

sub full32
{
    return $_[0] == MAX32 ;
}

sub decode_Zip64
{
    my $len = shift;
    my $context = shift;

my $z64Data = $context->{Zip64};
    my $inCentralHdr = $context->{InCentralDir} ;
    my $inLocalHdr = ! $inCentralHdr ;

$ZIP64 = 1;

if ($inLocalHdr || full32 $z64Data->[0]) {
        out_Q "  Uncompressed Size";
    }

if ($inLocalHdr || full32 $z64Data->[1]) {
        $context->{CompressedLength} = out_Q "  Compressed Size";
    }

if (full32 $z64Data->[2] ) {
        $context->{LocalHdrOffset} = out_Q "  Offset to Local Dir";
    }

if ($z64Data->[3] == 0xFFFF ) {
        out_V "  Disk Number";
    }
}

sub Ntfs2Unix
{
    my $m = shift;
    my $v = shift;

# NTFS offset is 19DB1DED53E8000

my $hex = Value_Q($v) ;
    $v -= 0x19DB1DED53E8000 ;
    my $ns = ($v % 10000000) * 100;
    my $elapse = int ($v/10000000);
    return "$hex '" . getT($elapse) .
           " " . sprintf("%0dns'", $ns);
}

sub decode_NTFS_Filetimes
{
    my $len = shift;
    my $context = shift;

out_V "  Reserved";
    out_v "  Tag1";
    out_v "  Size1" ;

my ($m, $s1) = read_Q;
    out $m, "  Mtime", Ntfs2Unix($m, $s1);

my ($a, $s3) = read_Q;
    out $m, "  Atime", Ntfs2Unix($m, $s3);

my ($c, $s2) = read_Q;
    out $c, "  Ctime", Ntfs2Unix($m, $s2);
}

sub getT
{
    my $time = shift ;

if ($opt_utc)
     { return scalar gmtime($time) }
    else
     { return scalar localtime($time) }
}

sub getTime
{
    my $time = shift ;

return "'" . getT($time) . "'";
}

sub decode_UT
{
    my $len = shift;
    my $context = shift;

my ($data, $flags) = read_C();

my $f = Value_C $flags;
    $f .= " mod"    if $flags & 1;
    $f .= " access" if $flags & 2;
    $f .= " change" if $flags & 4;

out $data, "  Flags", "'$f'";

-- $len;

if ($flags & 1)
    {
        my ($data, $time) = read_V();

out2 $data, "Mod Time",    Value_V($time) . " " . getTime($time) ;

$len -= 4 ;
    }

if ($flags & 2 && $len > 0 )
      {
          my ($data, $time) = read_V();

out2 $data, "Access Time",    Value_V($time) . " " . getTime($time) ;
          $len -= 4 ;
      }

if ($flags & 4 && $len > 0)
      {
          my ($data, $time) = read_V();

out2 $data, "Change Time",    Value_V($time) . " " . getTime($time) ;
      }
}

sub decode_AES
{
    # ref https://www.winzip.com/win/es/aes_info.html

my $len = shift;
    my $context = shift;

return if $len == 0 ;

my %lookup = ( 1 => "AE-1", 2 => "AE-2");
    out_v "  Vendor Version", sub {  $lookup{$_[0]} || "Unknown"  } ;

my $id ;
    myRead($id, 2);
    out $id, "  Vendor ID", unpackValue_v($id) . " '$id'";

my %strengths = (1 => "128-bit encryption key",
                     2 => "192-bit encryption key",
                     3 => "256-bit encryption key",
                    );

my $strength = out_C "  Encryption Strength", sub {$strengths{$_[0]} || "Unknown" } ;

my ($bmethod, $method) = read_v();
    out $bmethod, "  Compression Method", compressionMethod($method) ;

$context->{AesStrength} = $strength ;
}

sub decode_GrowthHint
{
    my $len = shift;
    my $context = shift;
    my $inCentralHdr = $context->{InCentralDir} ;

return if $len == 0 ;

out_v "  Signature" ;
    out_v "  Initial Value";

my $padding;
    myRead($padding, $len - 4);
    my $data = hexDump($padding);

out2 $padding, "Padding", $data;
}

sub decode_DataStreamAlignment
{
    my $len = shift;
    my $context = shift;
    my $inCentralHdr = $context->{InCentralDir} ;

return if $len == 0 ;

my ($data, $alignment) = read_v();

out $data, "  Alignment", Value_v($alignment) ;

my $recompress_value = $alignment & 0x8000 ? 1 : 0;

my $recompressing = $recompress_value ? "True" : "False";
    $alignment &= 0x7FFF ;
    my $hexAl =  sprintf("%X", $alignment);

out1 "  [Bit   15]",  "$recompress_value    'Recompress $recompressing'";
    out1 "  [Bits 0-14]", "$hexAl 'Minimal Alignment $alignment'";

if (! $inCentralHdr && $len - 2 > 0)
    {
        my $padding;
        myRead($padding, $len - 2);

out2 $padding, "Padding", hexDump($padding);
    }
}

sub decode_UX
{
    my $len = shift;
    my $context = shift;
    my $inCentralHdr = $context->{InCentralDir} ;

return if $len == 0 ;

my ($data, $time) = read_V();
    out2 $data, "Access Time",    Value_V($time) . " " . getTime($time) ;

($data, $time) = read_V();
    out2 $data, "Mod Time",    Value_V($time) . " " . getTime($time) ;

if (! $inCentralHdr ) {
        out_v "  UID" ;
        out_v "  GID";
    }
}

sub decode_Ux
{
    my $len = shift;
    my $context = shift;

return if $len == 0 ;
    out_v "  UID" ;
    out_v "  GID";
}

sub decodeLitteEndian
{
    my $value = shift ;

if (length $value == 4)
    {
        return Value_V unpack ("V", $value)
    }
    else {
        # TODO - fix this
        die "unsupported\n";
    }

my $got = 0 ;
    my $shift = 0;

#hexDump
    #reverse
    #my @a =unpack "C*", $value;
    #@a = reverse @a;
    #hexDump(@a);

for (reverse unpack "C*", $value)
    {
        $got = ($got << 8) + $_ ;
    }

return $got ;
}

sub decode_ux
{
    my $len = shift;
    my $context = shift;

return if $len == 0 ;
    out_C "  Version" ;
    my $uidSize = out_C "  UID Size";
    myRead(my $data, $uidSize);
    out2 $data, "UID", decodeLitteEndian($data);

my $gidSize = out_C "  GID Size";
    myRead($data, $gidSize);
    out2 $data, "GID", decodeLitteEndian($data);

}

sub decode_Java_exe
{
    my $len = shift;
    my $context = shift;

}

sub decode_up
{
    my $len = shift;
    my $context = shift;

out_C "  Version";
    out_V "  NameCRC32";

myRead(my $data, $len - 5);

out $data, "  UnicodeName", $data;
}

sub decode_Xceed_unicode
{
    my $len = shift;
    my $context = shift;

my $data ;

# No public definition available, so guess the fields used for this one
    # Data analysis based on output from Fiddler (https://www.telerik.com/fiddler),
    # which uses this field

# First 4 bytes appear to be "NUCX" all the time
    myRead($data, 4);
    out $data, "  ID", $data;

# Next 2 bytes contains a count of the remaining bytes/2
    # Probably the number of UTF-16 characters, including the
    # optional NULL prefix
    out_v "  Length";

# next is a UTF16 encode filename
    # sometimes preceeded by a two Null bytes

myRead($data, $len - 6);

my $prefix = substr($data, 0, 2);
    if ($prefix eq "\x00\x00")
    {
        # Found the Null prefix
        out $prefix, "  Null", '0000';
        substr($data, 0, 2) = '';
    }

out $data, "  UTF16LE Name", decode("UTF16LE", $data);
}

sub decode_NT_security
{
    my $len = shift;
    my $context = shift;
    my $inCentralHdr = $context->{InCentralDir} ;

out_V "  Uncompressed Size" ;

if (! $inCentralHdr) {

out_C "  Version" ;

out_v "  Type";

out_V "  NameCRC32" ;

my $plen = $len - 4 - 1 - 2 - 4;
        myRead(my $payload, $plen);
        out $plen, "  Extra Payload", hexDump($payload);
    }
}

sub decodeMVS
{
    my $len = shift;
    my $context = shift;

# data in Big-Endian
    myRead(my $data, $len);
    my $ID = unpack("N", $data);

if ($ID == 0xE9F3F9F0)
    {
        out($data, "  ID", "'Z390'");
        substr($data, 0, 4) = '';
    }

out($data, "  Extra Payload", hexDump($data));
}

sub printAes
{
    # ref https://www.winzip.com/win/es/aes_info.html

my $context = shift ;

my %saltSize = (
                        1 => 8,
                        2 => 12,
                        3 => 16,
                    );

myRead(my $salt, $saltSize{$context->{AesStrength} });
    out $salt, "AES Salt", hexDump($salt);
    myRead(my $pwv, 2);
    out $pwv, "AES Pwd Ver", hexDump($pwv);

return  $saltSize{$context->{AesStrength}} + 2 + 10;
}

sub printLzmaProperties
{
    my $len = 0;

my $b1;
    my $b2;
    my $buffer;

myRead($b1, 2);
    my ($verHi, $verLow) = unpack ("CC", $b1);

out $b1, "LZMA Version", sprintf("%02X%02X", $verHi, $verLow) . " '$verHi.$verLow'";
    my $LzmaPropertiesSize = out_v "LZMA Properties Size";
    $len += 4;

my $LzmaInfo = out_C "LZMA Info",  sub { $_[0] == 93 ? "(Default)" : ""};

my $PosStateBits = 0;
    my $LiteralPosStateBits = 0;
    my $LiteralContextBits = 0;
    $PosStateBits = int($LzmaInfo / (9 * 5));
	$LzmaInfo -= $PosStateBits * 9 * 5;
	$LiteralPosStateBits = int($LzmaInfo / 9);
	$LiteralContextBits = $LzmaInfo - $LiteralPosStateBits * 9;

out1 "  PosStateBits",        $PosStateBits;
    out1 "  LiteralPosStateBits", $LiteralPosStateBits;
    out1 "  LiteralContextBits",  $LiteralContextBits;

out_V "LZMA Dictionary Size";

# TODO - assumption that this is 5
    $len += $LzmaPropertiesSize;

skip($FH, $LzmaPropertiesSize - 5)
        if  $LzmaPropertiesSize != 5 ;

return $len;
}

sub readFromOffset
{
    # my $fh = shift;
    my $offset = shift;
    my $len = shift;

seekTo($offset) ;

my $buffer;
    myRead($buffer, $len);
    # $fh->read($buffer, $len) == $len
    length $buffer == $len
        or return '';

return $buffer;
}

sub chckForAPKSigningBlock
{
    my $fh = shift;
    my $cdOffset = shift;

# APK Signing Block comes directy before the Central directory

# If offset less than
    #
    #   len1     8
    #   id       4
    #   kv with zero len 8
    #   len1     8
    #   magic   16
    #   ----------
    #           44

return (0, 0, '')
        if $cdOffset < 44;

# Step 1 - 16 bytes before CD is literal string "APK Sig Block 42"
    my $magicOffset = $cdOffset - 16;
    my $buffer = readFromOffset($magicOffset, 16);

return (0, 0, '')
        if $buffer ne "APK Sig Block 42" ;

# Step 2 - read the two length fields
    #          and check they are identical
    $buffer = readFromOffset($cdOffset - 16 - 8, 8);
    my $len2 = unpack("Q<", $buffer);

return (0, 0, '')
        if $len2 == 0 ;

my $startApkOffset = $cdOffset -  8 - $len2 ;

$buffer = readFromOffset($startApkOffset, 8);
    my $len1 = unpack("Q<", $buffer);

return (0, 0, '')
        if $len1 != $len2;

return ($startApkOffset, $cdOffset - 16 - 8, $buffer);
}

sub scanApkBlock
{
    state $IDs = {
            0x7109871a  => "APK Signature v2",
            0xf05368c0  => "APK Signature v3",
            0x42726577  => "Verity Padding Block", # from https://android.googlesource.com/platform/tools/apksig/+/master/src/main/java/com/android/apksig/internal/apk/ApkSigningBlockUtils.java
            0x6dff800d  => "Source Stamp",
            0x504b4453  => "Dependency Info",
            0x71777777  => "APK Channel Block",
            0xff3b5998  => "Zero Block",
            0x2146444e  => "Play Metadata",
    } ;

seekTo($FH->tell() - 4) ;
    print "\nAPK SIGNING BLOCK\n";

scanApkPadding('');
    out_Q "Block Length Copy #1";
    my $ix = 1;

while ($FH->tell() < $APK - 8)
    {
         my ($bytes, $id, $len);
        ($bytes, $len) = read_Q ;
        out $bytes, "ID/Value Length #" . sprintf("%X", $ix), Value_Q($len);

($bytes, $id) = read_V;

out $bytes, "  ID", Value_V($id) . " '" . ($IDs->{$id} // 'Unknown ID') . "'";

outSomeData($len-4, "  Value");
        ++ $ix;
    }

out_Q "Block Length Copy #2";

my $magic ;
    myRead($magic, 16);

out $magic, "Magic", qq['$magic'];
}

sub scanApkPadding
{
    my $bytes = shift ;

# padding
    my $here = $FH->tell();
    my $got;
    myRead($got, $APK - $here);
    $got = $bytes . $got;
    if ($got =~ /^(\x00+)($APK_LEN)?/)
    {
        my $len = length $1 ;
        seekTo($here - length($bytes));
        outSomeData($len, "Null Padding");
    }
    else
    {
        seekTo($here);
    }

}

sub scanCentralDirectory
{
    my $fh = shift;

my $here = $fh->tell();

# Use cases
    # 1 32-bit CD
    # 2 64-bit CD

my @CD = ();
    my $offset = findCentralDirectoryOffset($fh);

return ()
        if ! defined $offset;

$fh->seek($offset, SEEK_SET) ;

# Now walk the Central Directory Records
    my $buffer ;
    my $cdIndex = 0;
    while ($fh->read($buffer, 46) == 46  &&
           unpack("V", $buffer) == ZIP_CENTRAL_HDR_SIG) {

my $cdEntryOffset = $fh->tell() - 46;
        ++ $cdIndex ;

my $compressedLength   = unpack("V", substr($buffer, 20, 4));
        my $uncompressedLength = unpack("V", substr($buffer, 24, 4));
        my $filename_length    = unpack("v", substr($buffer, 28, 2));
        my $extra_length       = unpack("v", substr($buffer, 30, 2));
        my $comment_length     = unpack("v", substr($buffer, 32, 2));
        my $locHeaderOffset    = unpack("V", substr($buffer, 42, 4));
        my $cdZip64 = 0;
        my $zip64Sizes = 0;

skip($fh, $filename_length ) ;

if ($extra_length)
        {
            $fh->read(my $extraField, $extra_length) ;
            # $self->smartReadExact(\$extraField, $extra_length);

# Check for Zip64
            # my SizesExtended = findID("\x01\x00", $extraField);
            my $zip64Extended = findID(0x0001, $extraField);

if ($zip64Extended)
            {
                $cdZip64 = 1;

if ($uncompressedLength == MAX32)
                {
                    $uncompressedLength = unpack "Q<", substr($zip64Extended, 0, 8, "");
                    $zip64Sizes = 1;
                }
                if ($compressedLength == MAX32)
                {
                    $compressedLength = unpack "Q<", substr($zip64Extended, 0, 8, "");
                    $zip64Sizes = 1;

}
                if ($locHeaderOffset == MAX32)
                {
                    $locHeaderOffset = unpack "Q<", substr($zip64Extended, 0, 8, "");
                }
            }
        }

my $got = [$locHeaderOffset, $compressedLength, $cdZip64, $zip64Sizes, $cdIndex, $cdEntryOffset] ;

skip($fh, $comment_length ) ;

push @CD, $got ;
    }

$fh->seek($here, SEEK_SET) ;

# @CD = sort { $a->[0]->cmp($b->[0]) } @CD ;
    @CD = sort { $a->[0] <=> $b->[0] } @CD ;

# Set the first Local File Header offset.
    $START = $CD[0]->[0]
        if @CD ;

return (1, $offset, @CD);
}

sub offsetFromZip64
{
    my $fh = shift ;
    my $here = shift;

$fh->seek($here - 20, SEEK_SET)
    # TODO - fix this
        or die "xx $!" ;

my $buffer;
    my $got = 0;
    ($got = $fh->read($buffer, 20)) == 20
    # TODO - fix this
        or die "xxx

$here $got $!" ;

if ( unpack("V", $buffer) == ZIP64_END_CENTRAL_LOC_HDR_SIG ) {
        my $cd64 = unpack "Q<", substr($buffer,  8, 8);

$fh->seek($cd64, SEEK_SET) ;

$fh->read($buffer, 4) == 4
        # TODO - fix this
            or die "xxx" ;

if ( unpack("V", $buffer) == ZIP64_END_CENTRAL_REC_HDR_SIG ) {

$fh->read($buffer, 8) ==  8
            # TODO - fix this
                or die "xxx" ;
            my $size  = unpack "Q<", $buffer;
            $fh->read($buffer, $size) ==  $size
            # TODO - fix this
                or die "xxx" ;

my $cd64 =  unpack "Q<", substr($buffer,  36, 8);

return $cd64 ;
        }

die "Cannot find 'Zip64 end of central directory record': 0x06054b50\nTry running with --scan option.\n" ;
    }

die "Cannot find signature for 'Zip64 end of central directory locator': 0x07064b50 \nTry running with --scan option.\n" ;
}

use constant Pack_ZIP_END_CENTRAL_HDR_SIG => pack("V", ZIP_END_CENTRAL_HDR_SIG);

sub findCentralDirectoryOffset
{
    my $fh = shift ;

# Most common use-case is where there is no comment, so
    # know exactly where the end of central directory record
    # should be.

$fh->seek(-22, SEEK_END) ;
    my $here = $fh->tell();

my $is64bit = $here > MAX32;
    my $over64bit = $here  & (~ MAX32);

my $buffer;
    $fh->read($buffer, 22) == 22
    # TODO - fix this
        or die "xxx" ;

my $zip64 = 0;
    my $centralDirOffset ;

if ( unpack("V", $buffer) == ZIP_END_CENTRAL_HDR_SIG ) {
        $centralDirOffset = unpack("V", substr($buffer, 16,  4));
    }
    else {
        $fh->seek(0, SEEK_END) ;

my $fileLen = $fh->tell();
        my $want = 0 ;

while(1) {
            $want += 1024 * 32;
            my $seekTo = $fileLen - $want;
            if ($seekTo < 0 ) {
                $seekTo = 0;
                $want = $fileLen ;
            }
            $fh->seek( $seekTo, SEEK_SET)
            # TODO - fix this
                or die "xxx $!" ;
            my $got;
            ($got = $fh->read($buffer, $want)) == $want
            # TODO - fix this
                or die "xxx $got  $!" ;
            my $pos = rindex( $buffer, Pack_ZIP_END_CENTRAL_HDR_SIG);

if ($pos >= 0 && $want - $pos > 22) {
                $here = $seekTo + $pos ;
                $centralDirOffset = unpack("V", substr($buffer, $pos + 16,  4));
                my $commentLength = unpack("V", substr($buffer, $pos + 20,  2));
                $commentLength = 0 if ! defined $commentLength ;

my $expectedEof = $fileLen - $want + $pos + 22 + $commentLength  ;
                # check for trailing data after end of zip
                if ($expectedEof < $fileLen ) {
                    $TRAILING = $expectedEof ;
                }
                last ;
            }

return undef
                if $want == $fileLen;
        }
    }

if (full32 $centralDirOffset)
    {
        $centralDirOffset = offsetFromZip64($fh, $here)
    }
    elsif ($is64bit)
    {
        # use-case is where a 64-bit zip file doesn't use the 64-bit
        # extensions.
        print "EOCD not 64-bit $centralDirOffset ($here)\n" ;

push @Messages,
            sprintf "Zip file > 4Gig. Expected 'Offset to Central Dir' to be 0xFFFFFFFF, got 0x%X\n", $centralDirOffset;

$centralDirOffset += $over64bit;
        $is64In32 = 1;
    }

($START_APK, $APK, $APK_LEN) = chckForAPKSigningBlock($fh, $centralDirOffset);

return $centralDirOffset ;
}

sub findID
{
    my $id_want = shift ;
    my $data    = shift;

my $XLEN = length $data ;

my $offset = 0 ;
    while ($offset < $XLEN) {

return undef
            if $offset + ZIP_EXTRA_SUBFIELD_HEADER_SIZE  > $XLEN ;

my $id = substr($data, $offset, ZIP_EXTRA_SUBFIELD_ID_SIZE);
        $id = unpack("v", $id);
        $offset += ZIP_EXTRA_SUBFIELD_ID_SIZE;

my $subLen =  unpack("v", substr($data, $offset,
                                            ZIP_EXTRA_SUBFIELD_LEN_SIZE));
        $offset += ZIP_EXTRA_SUBFIELD_LEN_SIZE ;

return undef
            if $offset + $subLen > $XLEN ;

return substr($data, $offset, $subLen)
            if $id eq $id_want ;

$offset += $subLen ;
    }

return undef ;
}

sub _dosToUnixTime
{
    my $dt = shift;

my $year = ( ( $dt >> 25 ) & 0x7f ) + 80;
    my $mon  = ( ( $dt >> 21 ) & 0x0f ) - 1;
    my $mday = ( ( $dt >> 16 ) & 0x1f );

my $hour = ( ( $dt >> 11 ) & 0x1f );
    my $min  = ( ( $dt >> 5  ) & 0x3f );
    my $sec  = ( ( $dt << 1  ) & 0x3e );

use POSIX 'mktime';

# Force mktime to return a UTC time
    local $ENV{TZ} = "UTC";

my $time_t = mktime( $sec, $min, $hour, $mday, $mon, $year, 0, 0, -1 );
    return 0 if ! defined $time_t;
    return $time_t;
}

sub nibbles
{
    my @nibbles = (
        [ 16 => 0x1000000000000000 ],
        [ 15 => 0x100000000000000 ],
        [ 14 => 0x10000000000000 ],
        [ 13 => 0x1000000000000 ],
        [ 12 => 0x100000000000 ],
        [ 11 => 0x10000000000 ],
        [ 10 => 0x1000000000 ],
        [  9 => 0x100000000 ],
        [  8 => 0x10000000 ],
        [  7 => 0x1000000 ],
        [  6 => 0x100000 ],
        [  5 => 0x10000 ],
        [  4 => 0x1000 ],
        [  4 => 0x100 ],
        [  4 => 0x10 ],
        [  4 => 0x1 ],
    );
    my $value = shift ;

for my $pair (@nibbles)
    {
        my ($count, $limit) = @{ $pair };

return $count
            if $value >= $limit ;
    }
}

{
    package Seen;

sub new
    {
        my $class = shift ;

my %object = ( overlaps     => [],
                       duplicates   => [],
                       detail       => [],
                       duplicate_count  => 0,
                       overlap_count    => 0,
                     ) ;

bless \%object, $class;
    }

sub save
    {
        my $self = shift ;
        my $hdrId = shift;
        my $name = shift;
        my $extras = shift;

my $from_offset = $extras->{LocalHdrOffset};
        my $to_offset = $from_offset ;
        $to_offset += $extras->{CompressedLength} - 1 ;

my $crc = $extras->{CRC};

$name = ::redactFilename($name) ;

for my $entry ( @{ $self->{detail} } )
        {
            if ( $from_offset == $entry->{from} && $to_offset == $entry->{to} && $crc == $entry->{crc})
            {
                $self->{duplicate_count} ++;
                print "$hdrId: '$name' matches with $entry->{str}\n"
            }
            elsif ( ($from_offset >= $entry->{from} && $from_offset <= $entry->{to} ) ||
                    ($to_offset   >= $entry->{from} && $to_offset   <= $entry->{to} )
               )
            {
                # die "overlap!"
                # push @{ $self->{overlap} },
                $self->{overlap_count} ++;

print "$hdrId: '$name' overlaps with $entry->{str}\n";
            }
        }

# warn "ADD $from_offset $to_offset $hdrId: $name\n";
        push @{ $self->{detail} },
             {
                from => $from_offset,
                to   => $to_offset,
                length => $extras->{CompressedLength},
                id   => $hdrId,
                crc  => $crc,
                name => $name,
                str  => "$hdrId: '$name'",
             } ;
    }

sub short_summary
    {
        my $self = shift;

my $duplicates = $self->{duplicate_count};
        push @Messages, "$duplicates duplicate entries"
            if $duplicates;

my $overlaps = $self->{overlap_count};
        push @Messages, "$overlaps overlap entries"
            if $overlaps;
    }

sub summary
    {
        my $self = shift ;

# disable for now
        return;

print "\n";
        for my $entry ( sort { $a->{from}->cmp($b->{from}) } @{ $self->{detail} } )

{
            my $from_offset = $entry->{from};
            my $to_offset = $entry->{to};
            my $hdrId = $entry->{id};
            my $name = $entry->{name};
            print "$hdrId\t" . $entry->{from} . "\n";

}
    }

}

sub Usage
{
    if (@_)
    {
        warn "$_\n"
        for @_  ;
        warn "\n";
    }

die <<EOM;
zipdetails [OPTIONS] file

Display details about the internal structure of a Zip file.

This is zipdetails version $VERSION

OPTIONS
     -h        display help
     --redact  Hide filenames in the output
     --scan    enable scannng mode.
               Blindly scan the file looking for zip headers
               Expect false-positives.
     --utc     Display date/time fields in UTC
     -v        Verbose - output more stuff
     --version Print version number

This program is free software; you can redistribute it and/or
modify it under the same terms as Perl itself.
EOM

}

__END__

=head1 NAME

zipdetails - display the internal structure of zip files

=head1 SYNOPSIS

zipdetails [-v][--scan][--redact][--utc] zipfile.zip
    zipdetails -h
    zipdetails --version

=head1 DESCRIPTION

This program creates a detailed report on the internal structure of zip
files. For each item of metadata within a zip file the program will output

=over 5

=item the offset into the zip file where the item is located.

=item a textual representation for the item.

=item an optional hex dump of the item.

=back

The program assumes a prior understanding of the internal structure of Zip
files. You should have a copy of the Zip
L<APPNOTE.TXT|http://www.pkware.com/documents/casestudies/APPNOTE.TXT> file
at hand to help understand the output from this program.

=head2 Default Behaviour

By default the program expects to be given a well-formed zip file.  It will
navigate the Zip file by first parsing the zip central directory at the end
of the file.  If that is found, it will then walk through the zip records
starting at the beginning of the file. Any badly formed zip data structures
encountered are likely to terminate the program.

If the program finds any structural problems with the zip file it will
print a summary at the end of the output report. The set of error cases
reported is very much a work in progress, so don't rely on this feature to
find all the possible errors in a zip file. If you have suggestions for
use-cases where this could be enhanced please consider creating an
enhancement request (see L<"SUPPORT">).

Date/time fields are found in zip files are displayed in local time. Use
the C<--utc> option to display these fields in Coordinated Universal Time
(UTC).

=head2 Scan-Mode

If you do have a potentially corrupt zip file, particulatly where the
central directory at the end of the file is absent/incomplete, you can try
usng the C<--scan> option to search for zip records that are still present.

When Scan-mode is enabled, the program will walk the zip file from the
start, blindly looking for the 4-byte signatures that preceed each of the
zip data structures. If it finds any of the recognised signatures it will
attempt to dump the associated zip record. For very large zip files, this
operation can take a long time to run.

Note that the 4-byte signatures used in zip files can sometimes match with
random data stored in the zip file, so care is needed interpreting the
results.

=head2 OPTIONS

=over 5

=item -h

Display help

=item --redact

Obscure filenames in the output. Handy for the use case where the zip files
contains sensitive data that cannot be shared.

=item --scan

Walk the zip file loking for possible zip records. Can be error-prone.
See L<"Scan-Mode">

=item --utc

By default, date/time fields are displayed in local time. Use this option
to display them in in Coordinated Universal Time (UTC).

=item -v

Enable Verbose mode. See L<"Verbose Output">.

=item --version

Display version number of the program and exit.

=back

=head2 Default Output

By default zipdetails will output the details of the zip file in three
columns.

=over 5

=item Column 1

This contains the offset from the start of the file in hex.

=item Column 2

This contains a textual description of the field.

=item Column 3

If the field contains a numeric value it will be displayed in hex. Zip
stores most numbers in little-endian format - the value displayed will have
the little-endian encoding removed.

Next, is an optional description of what the value means.

=back

For example, assuming you have a zip file with two entries, like this

$ unzip -l test.zip
    Archive:  setup/test.zip
    Length      Date    Time    Name
    ---------  ---------- -----   ----
            6  2021-03-23 18:52   latters.txt
            6  2021-03-23 18:52   numbers.txt
    ---------                     -------
        12                     2 files

Running C<zipdetails> will gives this output

$ zipdetails test.zip

0000 LOCAL HEADER #1       04034B50
    0004 Extract Zip Spec      0A '1.0'
    0005 Extract OS            00 'MS-DOS'
    0006 General Purpose Flag  0000
    0008 Compression Method    0000 'Stored'
    000A Last Mod Time         5277983D 'Tue Mar 23 19:01:58 2021'
    000E CRC                   0F8A149C
    0012 Compressed Length     00000006
    0016 Uncompressed Length   00000006
    001A Filename Length       000B
    001C Extra Length          0000
    001E Filename              'letters.txt'
    0029 PAYLOAD               abcde.

002F LOCAL HEADER #2       04034B50
    0033 Extract Zip Spec      0A '1.0'
    0034 Extract OS            00 'MS-DOS'
    0035 General Purpose Flag  0000
    0037 Compression Method    0000 'Stored'
    0039 Last Mod Time         5277983D 'Tue Mar 23 19:01:58 2021'
    003D CRC                   261DAFE6
    0041 Compressed Length     00000006
    0045 Uncompressed Length   00000006
    0049 Filename Length       000B
    004B Extra Length          0000
    004D Filename              'numbers.txt'
    0058 PAYLOAD               12345.

005E CENTRAL HEADER #1     02014B50
    0062 Created Zip Spec      1E '3.0'
    0063 Created OS            03 'Unix'
    0064 Extract Zip Spec      0A '1.0'
    0065 Extract OS            00 'MS-DOS'
    0066 General Purpose Flag  0000
    0068 Compression Method    0000 'Stored'
    006A Last Mod Time         5277983D 'Tue Mar 23 19:01:58 2021'
    006E CRC                   0F8A149C
    0072 Compressed Length     00000006
    0076 Uncompressed Length   00000006
    007A Filename Length       000B
    007C Extra Length          0000
    007E Comment Length        0000
    0080 Disk Start            0000
    0082 Int File Attributes   0001
         [Bit 0]               1 Text Data
    0084 Ext File Attributes   81B40000
    0088 Local Header Offset   00000000
    008C Filename              'letters.txt'

0097 CENTRAL HEADER #2     02014B50
    009B Created Zip Spec      1E '3.0'
    009C Created OS            03 'Unix'
    009D Extract Zip Spec      0A '1.0'
    009E Extract OS            00 'MS-DOS'
    009F General Purpose Flag  0000
    00A1 Compression Method    0000 'Stored'
    00A3 Last Mod Time         5277983D 'Tue Mar 23 19:01:58 2021'
    00A7 CRC                   261DAFE6
    00AB Compressed Length     00000006
    00AF Uncompressed Length   00000006
    00B3 Filename Length       000B
    00B5 Extra Length          0000
    00B7 Comment Length        0000
    00B9 Disk Start            0000
    00BB Int File Attributes   0001
         [Bit 0]               1 Text Data
    00BD Ext File Attributes   81B40000
    00C1 Local Header Offset   0000002F
    00C5 Filename              'numbers.txt'

00D0 END CENTRAL HEADER    06054B50
    00D4 Number of this disk   0000
    00D6 Central Dir Disk no   0000
    00D8 Entries in this disk  0002
    00DA Total Entries         0002
    00DC Size of Central Dir   00000072
    00E0 Offset to Central Dir 0000005E
    00E4 Comment Length        0000
    Done

=head2 Verbose Output

If the C<-v> option is present, column 1 is expanded to include

=over 5

=item *

The offset from the start of the file in hex.

=item *

The length of the field in hex.

=item *

A hex dump of the bytes in field in the order they are stored in the zip
file.

=back

Here is the same zip file dumped using the C<zipdetails> C<-v> option:

$ zipdetails -v test.zip

0000 0004 50 4B 03 04 LOCAL HEADER #1       04034B50
    0004 0001 0A          Extract Zip Spec      0A '1.0'
    0005 0001 00          Extract OS            00 'MS-DOS'
    0006 0002 00 00       General Purpose Flag  0000
    0008 0002 00 00       Compression Method    0000 'Stored'
    000A 0004 3D 98 77 52 Last Mod Time         5277983D 'Tue Mar 23 19:01:58 2021'
    000E 0004 9C 14 8A 0F CRC                   0F8A149C
    0012 0004 06 00 00 00 Compressed Length     00000006
    0016 0004 06 00 00 00 Uncompressed Length   00000006
    001A 0002 0B 00       Filename Length       000B
    001C 0002 00 00       Extra Length          0000
    001E 000B 6C 65 74 74 Filename              'letters.txt'
              65 72 73 2E
              74 78 74
    0029 0006 61 62 63 64 PAYLOAD               abcde.
              65 0A

002F 0004 50 4B 03 04 LOCAL HEADER #2       04034B50
    0033 0001 0A          Extract Zip Spec      0A '1.0'
    0034 0001 00          Extract OS            00 'MS-DOS'
    0035 0002 00 00       General Purpose Flag  0000
    0037 0002 00 00       Compression Method    0000 'Stored'
    0039 0004 3D 98 77 52 Last Mod Time         5277983D 'Tue Mar 23 19:01:58 2021'
    003D 0004 E6 AF 1D 26 CRC                   261DAFE6
    0041 0004 06 00 00 00 Compressed Length     00000006
    0045 0004 06 00 00 00 Uncompressed Length   00000006
    0049 0002 0B 00       Filename Length       000B
    004B 0002 00 00       Extra Length          0000
    004D 000B 6E 75 6D 62 Filename              'numbers.txt'
              65 72 73 2E
              74 78 74
    0058 0006 31 32 33 34 PAYLOAD               12345.
              35 0A

005E 0004 50 4B 01 02 CENTRAL HEADER #1     02014B50
    0062 0001 1E          Created Zip Spec      1E '3.0'
    0063 0001 03          Created OS            03 'Unix'
    0064 0001 0A          Extract Zip Spec      0A '1.0'
    0065 0001 00          Extract OS            00 'MS-DOS'
    0066 0002 00 00       General Purpose Flag  0000
    0068 0002 00 00       Compression Method    0000 'Stored'
    006A 0004 3D 98 77 52 Last Mod Time         5277983D 'Tue Mar 23 19:01:58 2021'
    006E 0004 9C 14 8A 0F CRC                   0F8A149C
    0072 0004 06 00 00 00 Compressed Length     00000006
    0076 0004 06 00 00 00 Uncompressed Length   00000006
    007A 0002 0B 00       Filename Length       000B
    007C 0002 00 00       Extra Length          0000
    007E 0002 00 00       Comment Length        0000
    0080 0002 00 00       Disk Start            0000
    0082 0002 01 00       Int File Attributes   0001
                          [Bit 0]               1 Text Data
    0084 0004 00 00 B4 81 Ext File Attributes   81B40000
    0088 0004 00 00 00 00 Local Header Offset   00000000
    008C 000B 6C 65 74 74 Filename              'letters.txt'
              65 72 73 2E
              74 78 74

0097 0004 50 4B 01 02 CENTRAL HEADER #2     02014B50
    009B 0001 1E          Created Zip Spec      1E '3.0'
    009C 0001 03          Created OS            03 'Unix'
    009D 0001 0A          Extract Zip Spec      0A '1.0'
    009E 0001 00          Extract OS            00 'MS-DOS'
    009F 0002 00 00       General Purpose Flag  0000
    00A1 0002 00 00       Compression Method    0000 'Stored'
    00A3 0004 3D 98 77 52 Last Mod Time         5277983D 'Tue Mar 23 19:01:58 2021'
    00A7 0004 E6 AF 1D 26 CRC                   261DAFE6
    00AB 0004 06 00 00 00 Compressed Length     00000006
    00AF 0004 06 00 00 00 Uncompressed Length   00000006
    00B3 0002 0B 00       Filename Length       000B
    00B5 0002 00 00       Extra Length          0000
    00B7 0002 00 00       Comment Length        0000
    00B9 0002 00 00       Disk Start            0000
    00BB 0002 01 00       Int File Attributes   0001
                          [Bit 0]               1 Text Data
    00BD 0004 00 00 B4 81 Ext File Attributes   81B40000
    00C1 0004 2F 00 00 00 Local Header Offset   0000002F
    00C5 000B 6E 75 6D 62 Filename              'numbers.txt'
              65 72 73 2E
              74 78 74

00D0 0004 50 4B 05 06 END CENTRAL HEADER    06054B50
    00D4 0002 00 00       Number of this disk   0000
    00D6 0002 00 00       Central Dir Disk no   0000
    00D8 0002 02 00       Entries in this disk  0002
    00DA 0002 02 00       Total Entries         0002
    00DC 0004 72 00 00 00 Size of Central Dir   00000072
    00E0 0004 5E 00 00 00 Offset to Central Dir 0000005E
    00E4 0002 00 00       Comment Length        0000
    Done

=head1 LIMITATIONS

The following zip file features are not supported by this program:

=over 5

=item *

Multi-part archives.

=item *

The strong encryption features defined in the L<APPNOTE.TXT|http://www.pkware.com/documents/casestudies/APPNOTE.TXT> document.

=back

=head1 TODO

Error handling is a work in progress. If the program encounters a problem
reading a zip file it is likely to terminate with an unhelpful error
message.

=head1 SUPPORT

General feedback/questions/bug reports should be sent to
L<https://github.com/pmqs/zipdetails/issues>.

=head1 SEE ALSO

The primary reference for Zip files is
L<APPNOTE.TXT|http://www.pkware.com/documents/casestudies/APPNOTE.TXT>.

An alternative reference is the Info-Zip appnote. This is available from
L<ftp://ftp.info-zip.org/pub/infozip/doc/>

For details of WinZip AES encryption see L<AES Encryption Information:
Encryption Specification AE-1 and AE-2|https://www.winzip.com/win/es/aes_info.html>.

The C<zipinfo> program that comes with the info-zip distribution
(L<http://www.info-zip.org/>) can also display details of the structure of
a zip file.

=head1 AUTHOR

Paul Marquess F<pmqs@cpan.org>.

=head1 COPYRIGHT

This program is free software; you can redistribute it and/or modify it
under the same terms as Perl itself.

${this.title}

Code Editor : zipdetails